356 Books for sale, + 911-356 tools

[Mike911scrs]

I have for sale

1X Porsche Technical Manual by Henry Elfrink 1963, 3rd enlarged edition, £45 ono

1X Porsche Technical Manual by Henry Elfrink 1961, no edition so poss' 1st, tatty cover red, £45 ono

1X Volume II UP-FIXIN der Porsche, dated 1-68, 211 pages, tatty cover, used condition but all pages clear to read, £30

1X Original Porsche engine tool for the 3.6 /964 engine, to hold the crank pully while un-doing the crank bolt and useing the extracter tool for the pully, stop's you sheering the location pin in the end of the crank, Tool No' P-9290 £150



All + shipping, or collection, can send photos if required

regards mike

[Mike911scrs]

up date on prices and tools added

regards mike

[Mike911scrs]

up date;

1X Original Porsche engine tool for the 3.6 /964 engine, to hold the crank pully while un-doing the crank bolt and useing the extracter tool for the pully, stop's you sheering the location pin in the end of the crank, Tool No' P-9290 £150, with pully extraction bolt

[Mike911scrs]

Up date on tools;


1X Original Porsche engine tool for the 3.6 /964 engine, to hold the crank pully while un-doing the crank bolt and useing the extracter tool for the pully, stop's you sheering the location pin in the end of the crank, Tool No' P-9290 £150, with pully extraction bolt
Top


1X 5 bar engine claw copy to FIT engine stand top VW313, may fit a Sealey stand?? £200, will carry a 930 turbo engine and fit with out removing the oil cooler, also fit's ; 356, air cooled VW engines, 911/912 engines, 1600, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3, 3.6

1X engine stand and VW 313 £350

[210bhp]

Hi Mike

Pm sent.

Regards
Mike

[Mike911scrs]

NOW SOLD;
1X Secrets of the inner circle,

[Mike911scrs]

up date on parts/tools

1X MATRA VW270a link pin shim setting tool, fits 356 and early beetle with link-pins and king pins, £90 ono, see page S15 of the 356 W/S manual for usage

1X Porsche 9251 gearbox extraction tool for the input shaft seal on a G50 gearbox, needs a clean £100, see page 34-113 of the 1986 gearbox section of the G50 manual for usage

both + shipping due to weight

regards mike

[Mike911scrs]

also the oil seal fitting tool to go with;

1X Porsche 9251 gearbox extraction tool for the input shaft seal on a G50 gearbox, needs a clean £100, see page 34-113 of the 1986 gearbox section of the G50 manual for usage
+
1X Porsche 9256 gearbox input-shaft seal fitting tool, £35, see page 34-114 of manual for usage

or £120 for both + shipping

also for the 928 owners on hear, the front crank seal fitting tool P9124 £35

regards mike