Porsche 911 1970 Fuel pump for Carbs - *Now Sold*

[rich73]

Hi There,
I've stripped this for inspection. The motor seems to run well when connected. Part number is 0580960009. Just looked on D911 and a new one is £791. Please assume this needs a rebuild with new O ring.
£100 plus postage.

20240115_215500 by richard cannings, on Flickr

20240115_215509 by richard cannings, on Flickr

20240115_215539 by richard cannings, on Flickr

Thanks
Richard

[Boydyrs]

Fit a Facet red top, regulator and 0-5psi regulator for carbs. Set pressure around 4/4.5 psi at idle which should drop to around 3psi when under load. Fitting a camera when running in engine bay will show you drop idle to load. 3psi is good for carbs.

[Boydyrs]

Error

[rich73]

That's actually really helpful thanks.
I've just fitted a Red Top and Regulator with Gauge. I didn't know the load/idle pressure differences and camera is a great idea thanks.
Richard

[rich73]

Just noticed when listing on ebay that a part was missing on the images. All present and correct.

20240118_185147 by richard cannings, on Flickr

[rich73]

Price drop to £50 plus postage