A complete set off new ‘Celette’ fixings to suit all Porsche 911’s from 1964 to 1989. They could also be used for 912’s with an additional bespoke pair of towers/plates as 912 engine mounts are different to the 911, all other towers/fixings offered here are the identical to both 911 and 912’s.
The fixings are made by Restoration Design, these are a premium heavyweight set of fixings and will allow the pulling of damaged cars unlike cheaper fixings which are not. I bought this a few years ago and have never been out of the box let alone used and have been dry stored (dusty joinery workshop) See reference photos, and photo of one of the fixings removed from the box to show unused condition.
Also include is a complete set of fully serviceable Celette MZ Towers to accept the fixings above. All 22 towers, including 2 large plates and one small plate (see reference photos) to include all pins. Rarely seen for sale as a set.
Price for both the Restoration Design Celette fixings and the MZ Towers £6500.00 - NO VAT.
With Carbench Jig (see below) £7000.00 - NO VAT
Also for sale I believe is a Carbench frame jig 3.87m x 1m wide crossmembers as shown in the photographs. The crossmember hole spacing is 50mm x 70mm therefore will not accept the 100mm x 100mm Celette MZ Tower hole centres, however I’m confident that Celette crossmembers could fitted to this jig with some adaptors as I was panning to do.
As the Carbench frame jig is not a match to the Celette MZ Towers I’m offering it first to the purchaser of the fixings/towers for only £500.00, if not taken then it will be offered for sale on its own at £1000.00
All items are in Lisburn, Northern Ireland, 8 miles from Belfast. I can arrange shipping at an extra cost to most areas in the UK, or come over and collect, I expect this will cost £300-400. Please note that these parts are heavy… I have access to a forklift for loading if collecting.
Terms of sale: - the first to agree to buy to pay £1k deposit within 48 hours, and arrange collection/delivery and balance payment within a week give or take a few days. If not sold as a lot I may offer to sell the fixings and towers separately, I don’t expect this will happen as both are needed in most cases. Further pics, info, shipping etc. is available.
by robin titterington, on Flickr
IMG_4285 Large by , on Flickr
IMG_4286 Large by , on Flickr[url=https://flic.kr/p/2p8ZNJi]
Screenshot 2023-10-13 at 17.49.19 by , on Flickr
IMG_4284 Large by , on Flickr[url=https://flic.kr/p/2p8ZKkz]
IMG_4279 Large by , on Flickr[url=https://flic.kr/p/2p92xEe]
IMG_4287 Large by , on Flickr