Engine Carrier

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
Rupsol
DDK addict
Posts: 142
Joined: Tue Jul 20, 2010 6:11 pm

Engine Carrier

Post by Rupsol »

looking for the bottom engine carrier that covers the fan pulley. Can someone also advise whether the 2 studs at the bottom which come out of the crankcase are just that.....studs? How long are they and are they simply there to mount the carrier plate? Mine have been welded to the carrier so I will have to grind them off. thanks in advance
You do not have the required permissions to view the files attached to this post.
Top
User avatar
AndrewSlater
I luv DDK!
Posts: 994
Joined: Wed Nov 30, 2011 3:35 pm

Re: Engine Carrier

Post by AndrewSlater »

I'm pretty sure they are normally two M10 x 40mm studs to secure the bottom of the carrier plate.
If you look on the engine case drawings on the PET guide they are shown there.

Regards
Andrew
1966 Porsche 912 Slate Grey, red interior - first owner owned for 41 years
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )
Top
Rupsol
DDK addict
Posts: 142
Joined: Tue Jul 20, 2010 6:11 pm

Re: Engine Carrier

Post by Rupsol »

thats helpfull Andrew thanks - are they there just to mount the carrier?
Top
User avatar
AndrewSlater
I luv DDK!
Posts: 994
Joined: Wed Nov 30, 2011 3:35 pm

Re: Engine Carrier

Post by AndrewSlater »

Yes I believe so, I don't think anything else attaches there - although its a few years now since I fit mine.
1966 Porsche 912 Slate Grey, red interior - first owner owned for 41 years
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )
Top
Rupsol
DDK addict
Posts: 142
Joined: Tue Jul 20, 2010 6:11 pm

Re: Engine Carrier

Post by Rupsol »

I hope so lol otherwise could get expensive
Top
Post Reply

Return to “Pre 1974 - Porsche 911 (longhood)”