Flyeheel bolts
Moderators: hot66, impmad2000, Nige
Flyeheel bolts
Hello I have taken my flywheel of my '70 914/6 engine. Am I right in thinking the bolts are stretch type and now need replacing?
- PeterK
- DDK rules my life!
- Posts: 1072
- Joined: Mon Sep 01, 2014 3:04 pm
- Location: GU51 - Fleet, Hampshire, UK
Re: Flyeheel bolts
Not sure about the 914/6, but I always replace flywheel bolts.
'79 Targa - restoration now mainly complete & being driven
viewtopic.php?f=28&t=59756
viewtopic.php?f=28&t=59756
Re: Flyeheel bolts
They are one use only unless they are ARP bolts which are cheaper!
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
Re: Flyeheel bolts
Where can I purchase ARP bolts?SeanP wrote:They are one use only unless they are ARP bolts which are cheaper!
-
- I luv DDK!
- Posts: 790
- Joined: Fri Apr 01, 2005 8:51 am
- Location: Harston, Leics
Re: Flyeheel bolts
Design 911 seems to stock some, not sure if they are right for yours.
https://www.design911shop.com/Clutch-Fl ... gLrWfD_BwE
https://www.design911shop.com/Clutch-Fl ... gLrWfD_BwE
-
- I luv DDK!
- Posts: 779
- Joined: Fri Mar 31, 2006 10:54 am
- Location: Kendal CUMBRIA
- Contact:
Re: Flyeheel bolts
HI Carl
the bolts above are for the 9 bolt/later engine, SC/3.2/964, I would not use the 9 bolt, bolts twice, as I have come across the heads falling off
the bolts you have will go back, as long as the socket hole is good and not rounded off, DO NOT use locktight on the threads, just the correct torque
regards mike
the bolts above are for the 9 bolt/later engine, SC/3.2/964, I would not use the 9 bolt, bolts twice, as I have come across the heads falling off
the bolts you have will go back, as long as the socket hole is good and not rounded off, DO NOT use locktight on the threads, just the correct torque
regards mike
Re: Flyeheel bolts
Sounds good. Thanks Mike.MBEngineering wrote:HI Carl
the bolts above are for the 9 bolt/later engine, SC/3.2/964, I would not use the 9 bolt, bolts twice, as I have come across the heads falling off
the bolts you have will go back, as long as the socket hole is good and not rounded off, DO NOT use locktight on the threads, just the correct torque
regards mike