911T - better with rev limiter?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
RobFrost
- DDK 1st, 2nd and 3rd for me!
- Posts: 2449
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
911T - better with rev limiter?
I've just bought a 6,500rpm rev limiting distributor rotor for my 1979 2.2 litre 911T. Thinking was, it gives me a clear notification of overzealous driving, as well as protection against mechanical gremlins such as stuck throttle etc. But I heard they can be hard on crankshafts. Of course, the intention is to fit it and never to use it. Is the engine better protected with the rotor, or without? I appreciate this is to some degree a matter of opinion.
Last edited by RobFrost on Sun Sep 19, 2021 9:08 pm, edited 1 time in total.
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
911hillclimber
- Nurse, I think I need some assistance
- Posts: 20716
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: 911T - better with rev limiter?
I have 2 911 engines, both protected by this rotor arm design.
Imho fit it, never drive the engine without one or some such device.
Easy to hit those rpm.
Imho fit it, never drive the engine without one or some such device.
Easy to hit those rpm.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
- Jonny Hart
- Put a fork in me, I'm done!
- Posts: 1612
- Joined: Mon Feb 01, 2010 2:28 pm
Re: 911T - better with rev limiter?
The mechanical limiter is horrible unless you like whiplash. Also not great for the engine as the fuel is still pouring into the cylinders unburnt.
Decided to address this in our CDI+. It has two electronic limiters. One retards the ignition. You feel this as the car slightly loses power which gives you a prompt to change up. If you drive through that, the next one is a cyclic ignition cut rather than a full cut. You can drive full throttle on this without being slung through the windscreen.
Decided to address this in our CDI+. It has two electronic limiters. One retards the ignition. You feel this as the car slightly loses power which gives you a prompt to change up. If you drive through that, the next one is a cyclic ignition cut rather than a full cut. You can drive full throttle on this without being slung through the windscreen.
- jb
- Me and DDK sitting in a tree! KISSING
- Posts: 2569
- Joined: Thu Jul 13, 2006 10:34 pm
- Location: London
Re: 911T - better with rev limiter?
The limiter on the CDI+ works extremely well with just enough power loss to make it obvious that you have gone over the limit.
#1370
-
RobFrost
- DDK 1st, 2nd and 3rd for me!
- Posts: 2449
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: 911T - better with rev limiter?
In a way, horrible is good - it'll teach me not to do it! But great to know there's another option.Jonny Hart wrote:The mechanical limiter is horrible unless you like whiplash. Also not great for the engine as the fuel is still pouring into the cylinders unburnt.
Decided to address this in our CDI+. It has two electronic limiters. One retards the ignition. You feel this as the car slightly loses power which gives you a prompt to change up. If you drive through that, the next one is a cyclic ignition cut rather than a full cut. You can drive full throttle on this without being slung through the windscreen.
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
jwhillracer
- Me and DDK sitting in a tree! KISSING
- Posts: 2907
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: 911T - better with rev limiter?
Yes, the limiter is there as a safety device, not to tell you it’s time to change gear!
JW
JW
Life's a single timed run with no practice....
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
-
911hillclimber
- Nurse, I think I need some assistance
- Posts: 20716
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: 911T - better with rev limiter?
Yes, too true.
I just hit it every now and then when I 'miss hear' the engine scream through my helmet.
Won't have the problem next year.
I just hit it every now and then when I 'miss hear' the engine scream through my helmet.
Won't have the problem next year.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
gridgway
- Nurse, I think I need some assistance
- Posts: 5724
- Joined: Tue Sep 02, 2008 10:59 pm
Re: 911T - better with rev limiter?
Going OT, but do you run any kind of shift lights on your race car Graham?

