H1 trim ring etc
Moderator: Miggs
-
knapmann
- DDK slapper chatter
- Posts: 481
- Joined: Mon May 18, 2020 4:01 pm
H1 trim ring etc
Sorted now thanks to DEEMAN! - Cheers Ian
Last edited by knapmann on Thu Jul 22, 2021 3:39 pm, edited 1 time in total.
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 18004
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: H1 trim ring etc
There's nothing 'special' about these - in the past I've just cut/used a suitable length of clear perspex rod (4mm diameter from memory) - something like this:knapmann wrote:
Also need, a light pin from a rear heated screen knob.
thanks
https://www.ebay.co.uk/itm/281780005228 ... SwjVVV2Kla
.
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
majordad
- DDK rules my life!
- Posts: 1024
- Joined: Sun Mar 24, 2013 6:05 pm
- Location: Co. Cork. Ireland
Re: H1 trim ring etc
That’s good info Andy, thanks
1972 2.4S, since 1988
993 RSR Cup
73 RS Rep Race
2018 GT3RS Lizard
993 RSR Cup
73 RS Rep Race
2018 GT3RS Lizard
-
911GP
- DDK forever
- Posts: 651
- Joined: Wed Dec 02, 2015 3:43 pm
Re: H1 trim ring etc
Are H1 rings different to H4? I have two H4 rings available.
Thanks
Gitesh
Thanks
Gitesh
-
DEEMAN
- DDK forever
- Posts: 675
- Joined: Tue Jan 11, 2011 10:29 pm
- Location: SCOTLAND
Re: H1 trim ring etc
Neil, you have an e-mail.
Regards
Ian
Regards
Ian
-
knapmann
- DDK slapper chatter
- Posts: 481
- Joined: Mon May 18, 2020 4:01 pm
Re: H1 trim ring etc
Yes H1s have 5 screw holes in them vs 3 for H4s911GP wrote:Are H1 rings different to H4? I have two H4 rings available.
Thanks
Gitesh