Has anyone got a photo or details of the correct bracket or pipe support which goes on the 35mm long M6 stud on the RHS inner wing of a 1972 2.4litre 911S?
Thanks
JW
Bracket/pipe clamp 1972 E series 911S
Moderator: Miggs
-
jwhillracer
- Me and DDK sitting in a tree! KISSING
- Posts: 2905
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Bracket/pipe clamp 1972 E series 911S
Life's a single timed run with no practice....
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
-
jwhillracer
- Me and DDK sitting in a tree! KISSING
- Posts: 2905
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: Bracket/pipe clamp 1972 E series 911S
Went back out to the garage and discovered the answer to my own question when one of the twin pipe brackets was to small to fit the side oil cooler lines………….
It’s the heat, I tell you!
Cheers
JW
It’s the heat, I tell you!
Cheers
JW
Life's a single timed run with no practice....
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT