Fuel lid spring replacing !!
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
murray
Fuel lid spring replacing !!
tried the Pelican forum suggestion of a tie wrap through the central hole but it appears that you still cannot tension the spring. Suggestion also to compress the spring until the 2 arms are nearly touching then tie with wire...problem is you cannot get snips inside to release wire...any suggestions would be welcome thank you .
-
murray
Re: Fuel lid spring replacing !!
Problem now solved with compressing the 2 spring arms in a vise then a tie wrap , assemble then cut tie...sorted.