Oil filler neck valve

yoda · Post by **yoda** » Sat Sep 12, 2020 10:59 pm

Can anyone tell me what this valve / outlet next to the oil filler neck is for? I noticed the rubber bung that seals it had cracked so was going to replace it but wondered what the valve was there for as I hadn’t noticed it before.

Thanks

hot66 · Post by **hot66** » Sun Sep 13, 2020 7:59 am

That’s a later tank by the looks of the cap. That is specific for an IB car and Probo part of their oil breather system / vacuum.

Is this your RS spec car ?

yoda · Post by **yoda** » Sun Sep 13, 2020 9:04 am

Hi James. Yes, it’s a 3.2 Carrera neck and cap on my car. I think you are right, there is a vacuum pipe on the 3.2s so presumably this has just been capped off.

Thanks

Mick Cliff · Post by **Mick Cliff** » Sun Sep 13, 2020 6:00 pm

Interesting...the rep I once owned had a similar capped off 'thingy'.

911hillclimber · Post by **911hillclimber** » Sun Sep 13, 2020 7:41 pm

I have a stock 1985 3.2 in my 73T stock 73 tank and all the 3.2 pipes connect to it.
No blanking off plugs etc.

yoda · Post by **yoda** » Sun Sep 13, 2020 8:17 pm

Thanks. Looks like it was for vacuum pipes in a 3.2 application but not needed on an early MFI car.

DDK - Die Deutschen Klassiker