What do I call these if I'm trying to sell them, just heads?

[mrsimpson]

Hey all,

I've a few parts that I'm going to be selling. But as I'm not that mechanical (yet) I hoped you could help me identify or name what I have.

I have two sets of 'heads' from a 71 911E with MFI 2.2 Litre.

But are they just known as heads? As they also have the cam housing, cams and everything inside too...

?

Thanks

https://drive.google.com/file/d/1YvSDoO ... sp=sharing

[KS]

Try this:

[Gary71]

Heads; The three bits at the bottom of the pic with the valves in
Cam box; the aluminium casting that joins the heads together
Rocker covers: The outer magnesium black bit

In terms of return you'd be better off stripping to components and selling separately, assuming the cams aren't as rusty as the gears that is...

[mrsimpson]

Thank Gary. Is it a simple process to strip them down? Any special tools needed?

[Gary71]

The challenge is going to be undoing the cam nut as it needs a big crowsfoot spanner (can't remember the size) everything else is just normal tools.

Holding it still with the assembly loose like that and not mounted on an engine and on a stand will be... errr fun?

[SeanP]

46mm crows foot and the cam holding socket. 150Nm or so on the nut to tighten. They are a bit of a fit to tighten on the engine