front arb for 69 911
Moderator: Miggs
front arb for 69 911
I want to put a front arb on my 69T. I did half the job a while back by adding a rear arb which is genuine Porsche rather than aftermarket.
Anyone got a setup for the front? OEM preferred, but aftermarket considered.
Thanks
Graham
Anyone got a setup for the front? OEM preferred, but aftermarket considered.
Thanks
Graham
Re: front arb for 69 911
Having investigated, looks like the best for my car is a 15mm ARB if anyone has anything?
Thanks
Graham
Thanks
Graham
Re: front arb for 69 911
Hi Graham,
I have just swapped mine over and put on an OEM arb. I have taken off a weltmeister bar complete with all its gubbins. Let me know if you fancy it. £100?
Cheers
Rich
I have just swapped mine over and put on an OEM arb. I have taken off a weltmeister bar complete with all its gubbins. Let me know if you fancy it. £100?
Cheers
Rich
-
- DDK addict
- Posts: 119
- Joined: Tue Jan 12, 2010 8:49 pm
- Location: Cph, DK
Re: front arb for 69 911
I can do you a NEW complete set , with org porsche bushings and aftermarket bar , brackets, drop links etc for around 350 EURO
+ shipping to UK
you are wellcome to send me a mail at early911parts@gmail.com
got all you need in 15&18 mm front and rear and you want find it cheaper ..trust me and its all the same
Marek
+ shipping to UK
you are wellcome to send me a mail at early911parts@gmail.com
got all you need in 15&18 mm front and rear and you want find it cheaper ..trust me and its all the same
Marek
Re: front arb for 69 911
Right, I'm still on the lookout for front arb bits if anyone has anything?
Re: front arb for 69 911
Bump, still looking
-
- Nurse, I think I need some assistance
- Posts: 19025
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: front arb for 69 911
Do you mean ALL the bits, the arms, conical bushes/housings, drop links or just the bar itself?
I have a through the body bar, nothing else.
If you need the whole lot I can't help Graham.
I have a through the body bar, nothing else.
If you need the whole lot I can't help Graham.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Re: front arb for 69 911
Yes I think it's all the bits Graham. It looks like the holes are covered with blanking plates at the moment.
Cheers
Graham
Cheers
Graham