Stainless cup holder
Moderator: Bootsy
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2559
- Joined: Tue Mar 23, 2010 1:35 pm
- Location: West Cork,Ireland
Re: Stainless cup holder
Fabulous Tom- as you can see the extended Nardi works petfectly
Thanks
C
ps Next product??
Sent from my iPhone using Tapatalk
Clive
West Cork, Ireland
RGruppe #814
1978 SC/1984 3.2 Outlaw -Jaffa 911
1973 914 - on Webers - historic rally car- Tango 914
1977 924 2.0 on Webers street legal race car - Martini 924
Flachbau -in progress
West Cork, Ireland
RGruppe #814
1978 SC/1984 3.2 Outlaw -Jaffa 911
1973 914 - on Webers - historic rally car- Tango 914
1977 924 2.0 on Webers street legal race car - Martini 924
Flachbau -in progress
Re: Stainless cup holder
Clive, thanks for posting the picture. Looks great. I am delighted the extended version works. It’s also nice to see the Nardi style in a car. Works well. Enjoy
Tom
Tom
DDK#694
-
- DDK Fanatic
- Posts: 96
- Joined: Fri Jul 31, 2015 5:48 pm
- Location: Cheshire
Re: Stainless cup holder
Apologies if I missed it but was the solution for the early cars sorted?
Oli
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
Re: Stainless cup holder
Oli,Hannibales wrote:Apologies if I missed it but was the solution for the early cars sorted?
Not yet, only just back my holidays. I have made the adjustment to clear the central tunnel and altered the fixing set up. I sent one to Mike to try in his 67 and he is telling me there is a slight adjustment required. I am hoping to see exactly what's required made the necessary changes and then will let you know. Sorry for the delay.
Tom
DDK#694
Re: Stainless cup holder
Oli,Hannibales wrote:Apologies if I missed it but was the solution for the early cars sorted?
Looks like the early car cup holder is sorted. I met up with Mike last week and will get these cut now I am sure they fit. My plan is to produce a run of stainless (bright or matt) and some black anodised ones.
The design will differ slightly from the std CUPL and will only have two holes on the blade (in all honesty you don't really see the design when it is on the floor).
I can't remember how many early cars were looking for these but will look back through the messages when I get a chance.
It would be great to get some feedback on what finish is preferred, easier to get these done in batches.
Black anodised
Polished stainless
DDK#694
- Jonny Hart
- Put a fork in me, I'm done!
- Posts: 1550
- Joined: Mon Feb 01, 2010 2:28 pm
Re: Stainless cup holder
Careful with the brushed finish as it can leave some very sharp edges. You may have to get those ‘tumbled’ as well.
Re: Stainless cup holder
Thanks Jonny. All good, the brushed stainless is done by hand and is smooth. The aluminium ones are linished then anodised, the finish is a nice sharp feel but never rough.
Tom
Tom
DDK#694
- Jonny Hart
- Put a fork in me, I'm done!
- Posts: 1550
- Joined: Mon Feb 01, 2010 2:28 pm
Re: Stainless cup holder
Btw, I have the polished stainless one, nicely finished.
-
- DDK Fanatic
- Posts: 96
- Joined: Fri Jul 31, 2015 5:48 pm
- Location: Cheshire
Re: Stainless cup holder
Fantastic, I'll take two polished stainless if I may!
Oli
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
Re: Stainless cup holder
Much appreciated, cut and will be in at the polisher tomorrow. I will get these shipped next week. Thanks again.Hannibales wrote:Fantastic, I'll take two polished stainless if I may!
DDK#694
-
- Put a fork in me, I'm done!
- Posts: 1831
- Joined: Mon Feb 06, 2006 9:09 pm
- Location: Coulsdon, Surrey.
Re: Stainless cup holder
I've been reading this thread over the last month or so and have been wondering what all the fuss about a cup holder is about?
Today I went out in the 911 and called in at McDonald's. Jumped back into the car to be told "you've got no bloody cup holders in this car". Yes - nowhere to put my coffee.
So - If you have one can I have a black anodised cup holder please?
Ralph.
Today I went out in the 911 and called in at McDonald's. Jumped back into the car to be told "you've got no bloody cup holders in this car". Yes - nowhere to put my coffee.
So - If you have one can I have a black anodised cup holder please?
Ralph.
Re: Stainless cup holder
Ralph,Ralph wrote:I've been reading this thread over the last month or so and have been wondering what all the fuss about a cup holder is about?
Today I went out in the 911 and called in at McDonald's. Jumped back into the car to be told "you've got no bloody cup holders in this car". Yes - nowhere to put my coffee.
So - If you have one can I have a black anodised cup holder please?
Ralph.
Delighted to be able to assist. One question, if you place a ruler on the seat rails of your car does this extend past and clear the side of the central tunnel? SWB cars and in some other cars I have supplied the central tunnel extends past the line of the seat rail frame, this then means the hole for the cup to fit into is partly obscured. If you can check this for me I can then send the correct one.
Thanks again
Tom
DDK#694
-
- DDK Fanatic
- Posts: 96
- Joined: Fri Jul 31, 2015 5:48 pm
- Location: Cheshire
Re: Stainless cup holder
Can I just confirm that this is still correct before I send the monies over?
Tp81 wrote:
The price will be set at £45 on DDK which allows for postage to anywhere in the UK, I will post further if required but need to check rates.
Pay Pal (friends/ family) is going to be the easiest, my good lady has agreed to handle the shipping so payment will be to her account:
cor3w@btinternet.com
Please clearly state in the notes: Delivery address, finish desired, model year.
Oli
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
Re: Stainless cup holder
£55 for the anodised black. Sorry for the short reply. On the golf course. PayPal details correct.
DDK#694
-
- DDK Fanatic
- Posts: 96
- Joined: Fri Jul 31, 2015 5:48 pm
- Location: Cheshire
Re: Stainless cup holder
Money sent for two polished stainless holders for early cars
Oli
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1