Targa quarter lights
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
Targa quarter lights
Very frustrating...…….neither quarter light operate in my 72 Targa. The lock is jammed in the upright position. I have dismantled the surround and taken the glass and frame out (might regret that when it comes to getting it back in with the rubber) but no amount of gentle or forceful manipulation has any effect. The locking handle moves about a quarter of an inch and that's your lot. Any ideas?
Also where can I get replacement grub screws for the surround? Half of them were missing.
Thanks in advance x
Also where can I get replacement grub screws for the surround? Half of them were missing.
Thanks in advance x
-
- Put a fork in me, I'm done!
- Posts: 1663
- Joined: Fri Mar 01, 2013 11:45 am
- Location: Kernow - good old Cornwall
Re: Targa quarter lights
Sounds silly but have you pressed the button in?
Re: Targa quarter lights
hope I have not lost my marbles lol - I will check later...……...
Re: Targa quarter lights
nope - still nothing doing
Re: Targa quarter lights
soaked with wd40 and the button now works....all sorted thanks - any ideas on the grub screws?
- cschmueck
- DDK Seasoned Poster
- Posts: 38
- Joined: Mon Dec 08, 2014 10:43 am
- Location: Irthlingborough, Northamptonshire
Re: Targa quarter lights
Hi, the screws are very short standard DIN countersunk screws - at least on mine. I do not remember any grub screws.
Regards,
Christian
Regards,
Christian
911T 1972
MGB 1970
NSU Lambretta 1954
DKW 110 1968
MGB 1970
NSU Lambretta 1954
DKW 110 1968
-
- I need to get out more!
- Posts: 3308
- Joined: Fri Nov 14, 2003 8:31 am
- Location: Leicester, a convenient mid point !
- Contact:
Re: Targa quarter lights
I remember a very small roll pin, not a grub screw. I’ll see what I can find in my spares
Tim Bennett
RHD Targa 2.2T EFI, Triumph ITB's, EDIS and Megasquirt.
"Old enough to know what's right and young enough not to choose it"
#1153
RHD Targa 2.2T EFI, Triumph ITB's, EDIS and Megasquirt.
"Old enough to know what's right and young enough not to choose it"
#1153
Re: Targa quarter lights
sorry grub screw is misleading - they are counter sunk crossheads
Re: Targa quarter lights
anyone know what size they are - guessing m2 x 4?
- RichardBTek
- DDK addict
- Posts: 136
- Joined: Thu Jan 21, 2016 8:14 pm
- Contact:
Re: Targa quarter lights
Hi
I've just stripped down two 1070 Quarterlights. On a 1970E the button unscrews and the arm is held in place by a small roll pin which taps out with a drift.
I've just stripped down two 1070 Quarterlights. On a 1970E the button unscrews and the arm is held in place by a small roll pin which taps out with a drift.
1971 911T RHD (Big Restoration)