Hi all, got a dodgy MFI speed switch/rpm transducer. When microswitch pressed at above 1500rpm, engine cuts out rather than cycling between 1300 and 1500rpm. To my non-expert eye the PCB looks OK, but have no means to test it discretely. Solenoid, wiring and microswitch all check out OK. Ordered a modern Bosch replacement (F026T00002) but would like to get the original working if possible. Can anyone recommend a suitable supplier with electronics expertise?
thanks
Speed switch recommendations please
Moderators: hot66, impmad2000, Nige
-
IJD
- DDK Seasoned Poster
- Posts: 22
- Joined: Sun Mar 17, 2019 10:15 pm
- Location: North Yorkshire
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 18002
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: Speed switch recommendations please
Tim Bennett (impmad2000 on DDK) used to repair them - might be worth sending him a pm ...
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
IJD
- DDK Seasoned Poster
- Posts: 22
- Joined: Sun Mar 17, 2019 10:15 pm
- Location: North Yorkshire
Re: Speed switch recommendations please
thanks for the tip, i'll try that.
rgds
Ian
rgds
Ian
-
Jonny Hart
- Put a fork in me, I'm done!
- Posts: 1612
- Joined: Mon Feb 01, 2010 2:28 pm
Re: Speed switch recommendations please
Our CDI+ units have the speed switch function built in. Just sayin....