Neatrix Bushes

[tanick]

Can any one tell me about gluing neatrix bushes. When I took the spring plates off the bushes were loose, not the OEM vulcanized ones. I've found a receipt in the file for Neatrix bushes. I seem to remember seeing comments about attaching these to the spring plates with superglue.

Should I superglue them back on now the plates have been de-rusted and painted? There appears to be glue residue on them from last time.

[Luke]

glue them to the spring plates on both sides, lubricate the bush face that enteres the chassis/cover.

L

[tanick]

Thanks Luke.

I guess I should use non-petroleum based grease so it doesn't eat the rubber?

[Luke]

yup silicone grease it the way forward

[domtoni]

Luke,

Does that mean that all PU bushings should be glued onto the spring plate, or is it just this particular brand?

thanks
Dom

[Luke]

i can't say for any other type, I believe neatrix are a bit softer than standard poly's so the mounting procedure could be different,

[domtoni]

thanks