Hi All,
Little Progress, but lots of things bubbling at the moment.....
Engine
Paul has now dispatched my Engine Case to Stateside Tuning for Align boring, not sure how long this will take but hopefully the engine build should get under way next month. I am also going out tonight to measure up an engine bay to get the lengths I need to make my up my fuel injection ECU wiring loom. I have also made a new friend through a Classic car meet (Hi Bob if you are reading this) that is a retired electronics engineer who has a very similar set-up to mine on his beautiful Lotus Elan (Jenveys, Emerald ECU, and same sorts of sensors as me) so he is going to advise on how best to construct the loom once I have all of the measurements.
Gearbox
I have dropped off my AH code IRS gearbox at Bears Motorsport for a check over & rebuild with the addition of some beefed up Side plates and a very rare 3.44 Ring and Pinion Set that should make motorway cruising a little easier.
Fuel Tank
I have made the blanking plate for the Fuel tank Sender and screwed it in, so fuel tank now finished ready to install in the car.
Door & Window Frames
The door and window frames have now both arrived and are both in great condition. I will be re-selling the original rear quarter window glass as they will not get through IVA and I will replace them with some of Gary's Speedster Clinic finest 'E' marked Glass.
Chassis
Red9 should have started work on adapting their front suspension to fit the Speedster Clinic chassis this week so I am waiting for pictures to come rolling in from Simon at Red9, so watch this space. I hope to pick it up next month then the fun starts.
Gauges
I have decided not to go with the Porsche replica gauges that most people go with, but instead I am going to fit the Autometer Pro Comp Ultralight range Speedo, Tacho, Volts, Oil Pressure, Oil Temperature, Fuel Gauge and a Clock I will also go with a Digital Cylinder Head temperature gauge as the Autometer does not support the temperature rage of the Aircooled engine. I have most of them now but still looking for a 5" Speedo Electrical or GPS if anyone has one???
![Image](https://farm5.staticflickr.com/4218/35309947960_8754b6322f_s.jpg)