Cleaning Fuse Block

[BILLY BEAN]

What is the best way to clean a fuse block especially the terminals?
Thanks for any advice.
Regards, Kirk

[visualfx]

Kirk,

I use these on the fuse terminals and things like bulb holders, works great on copper tabs also

http://www.ebay.co.uk/itm/Fibre-Fiber-F ... 3641.l6368

cheers

Garry

[BILLY BEAN]

Garry,
Thanks very much for the help.
Regards, Kirk.

[Alan @ CanfordClassics]

We take it out and use our vapour blaster on low pressure. They look like new after.

HTH

Alan

[BILLY BEAN]

Thanks Alan but I am going to rely on elbow grease in the absence of a vapour blaster.

[Jonny Hart]

You can also soak them in acid too. Alternatively, buy a a proper fuse panel from us.

[aston]

I used a Dremel with a small wire brush attachment.

[Alan @ CanfordClassics]

If you get stuck Billy just send it down or if passing you are welcome to borrow it.

Alan

[BILLY BEAN]

Thanks to every one who took the trouble to respond. Fuse blocks now cleaned.
Jonny nice try at a sale of your new fangled fuse blocks. Thanks but no thanks.
Regards.