How to remove (or not) the Karmann badge on the door post

Splitty64 · Post by **Splitty64** » Tue Jan 13, 2015 12:12 pm

My car is about to go for blasting, this is the last bit left attached and I don't want to trash it. Is there an easy way to remove the plate? those 4 pins look solid. Failing that its a careful mask up required

Nick Moss · Post by **Nick Moss** » Tue Jan 13, 2015 12:17 pm

The pins are like small nails, they should pull straight out. New ones are available.

Splitty64 · Post by **Splitty64** » Tue Jan 13, 2015 1:29 pm

Can you get a grip on the heads, or do they lever out from behind? Heads look domed so I am guessing some gentle leverage to start them off?

DEEMAN · Post by **DEEMAN** » Tue Jan 13, 2015 1:45 pm

I eased mine out by putting a craft knife blade under the badge working at each corner in turn, little by little. Came out quite easily actually.

Ian

Splitty64 · Post by **Splitty64** » Tue Jan 13, 2015 3:18 pm

Well, sounds like that's what I will be trying tonight, thanks all

DDK - Die Deutschen Klassiker

How to remove (or not) the Karmann badge on the door post

How to remove (or not) the Karmann badge on the door post

Re: How to remove (or not) the Karmann badge on the door pos

Re: How to remove (or not) the Karmann badge on the door pos

Re: How to remove (or not) the Karmann badge on the door pos

Re: How to remove (or not) the Karmann badge on the door pos