911T by TP021272, on Flickr
I started striping out the interior last night to get a better look at the extent of the rust. Carpets, seats and the vinyl will be thoroughly cleaned while they are out.
I am considering striping the waxes and build up off the vinyl and respraying black. Woolies sell a kit. Does anyone have experience of this? I will try and basic clean first, I don't want to loose the patina of the car so probably won't bother.
http://www.woolies-trim.co.uk/c-118-vin ... ation.aspx
Looking on detailing threads I think the best recommendation for vinyl and leatherette is to use leather cleaner and creams, Gliptone Liquid leather will be the product of choice.
911 T by TP021272, on Flickr
The back shelf is solid enough but has some unsightly serious surface rust, I intend scraping / brushing as much of this away as possible and then treat the surface. There is one small hole on the LHS right below the corner of the window, when the windows are out i will get a better look at this and hopefully get it welded or treated.
911 T by TP021272, on Flickr
Most of the sound deadening pads have seen better days, the rear shelf runner is gone. Are these easily sourced?
911 T by TP021272, on Flickr
The floors are good with the exception of a small hole that has been badly patched.
911 T by TP021272, on Flickr
Can someone post up a link of the build up from floor through to carpets back in. Is it simply prime, paint, sound mat and then floor mats? Can the original sound mats still be sourced?
Regards
Tom
