This lovely scorching summer has caused my BT5 screen to spring leaks at both lower corners.
2 Qs:
1. How does the dash top trim panel come off?
2. Any suggestions for a non-adhesive goo to smear under the edge of the still-supple-not-too-old screen seal? My first thought was a touch of Wellseal?
Any help greatly appreciated.
Winston
Leaky screen seal
-
Winston Teague
- Put a fork in me, I'm done!
- Posts: 1868
- Joined: Thu Apr 24, 2008 7:41 pm
- Location: Worcestershire
- Contact:
Leaky screen seal
Winston
'61 356 BT5 & a lot of broken chain driven stuff
'61 356 BT5 & a lot of broken chain driven stuff
-
Helen
- Events Organiser
- Posts: 5519
- Joined: Wed Mar 10, 2004 8:55 pm
- Location: Cumbria
have you got the correct seals in your windows ?
apparently there are diffrent seals for Karman made cars than cars made else where.
we discovered this when the seals on our 356c shrunk back and started leaking. ..because we had the wrong set of seals fitted.
apparently there are diffrent seals for Karman made cars than cars made else where.
we discovered this when the seals on our 356c shrunk back and started leaking. ..because we had the wrong set of seals fitted.
member#1182
Currently Porscheless but on the look out for my 30th
Currently Porscheless but on the look out for my 30th
-
Winston Teague
- Put a fork in me, I'm done!
- Posts: 1868
- Joined: Thu Apr 24, 2008 7:41 pm
- Location: Worcestershire
- Contact:
Thanks 8URN, I will probably try your trick whilst finding out more about any differences in the type of replacement seal. Mine is an Reutter bodied car so thanks Helen, for the tip off. And thanks to Mike at PRS for all your advice and info too.
Will post results as and when
All the best
Winston
Will post results as and when
All the best
Winston
Winston
'61 356 BT5 & a lot of broken chain driven stuff
'61 356 BT5 & a lot of broken chain driven stuff

