Drop 'em, or not?

Porsche 356 Virtual home

Moderators: 58A - 71E, Helen

Post Reply
sjm
DDK rules my life!
Posts: 1145
Joined: Thu Apr 12, 2007 11:10 am
Location: Kent

Drop 'em, or not?

Post by sjm »

My car is off to PRS next month for annual MOT/fettling (that's "fettling" Cubist!!!). While it's there I'm having the brakes and suspension rebuilt. Plan for the suspension is swap over to adjustable Konis and reduce the ride height a bit - also fit a slightly thicker ARB to tighten things up a little. Has anyone here got any tips on how low to go without compromising the overall ride too much? I would like to lower it enough to give a more sporting feel, but not make it rock hard.

I know Paul will be able to advise, but I'll be interested in any ideas from here as well.
Simon Moore
1958 356A
1978 Aston Martin V8
1988 Jaguar XJS 3.6 manual
1959 Lambretta Li125
User avatar
hot66
Moderator
Posts: 19249
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Post by hot66 »

if you can feel the tarmac touching the pan you're about right ;)
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
sjm
DDK rules my life!
Posts: 1145
Joined: Thu Apr 12, 2007 11:10 am
Location: Kent

Post by sjm »

:lol: I'm guessing that might affect the ride a little?!?
Simon Moore
1958 356A
1978 Aston Martin V8
1988 Jaguar XJS 3.6 manual
1959 Lambretta Li125
cubist
The Fenland Feltcher
Posts: 4044
Joined: Wed Dec 03, 2003 12:48 pm

Post by cubist »

'Low as' in my garage! Paul will advise you otherwise i'm guessing... lengthened slot on my front beam for a 4" drop and it transformed it. 2 outer splines rotation on the rear and the sebring drags under hard bootings... just right then. Have just purchased dropped spindles from BFY which means I can now wind the front up a touch and return a little more bounce to my flounce...

(I have however whacked a sodding crack into my case over a local level crossing and am now building another engine to replace it... so low as you like if your local geography allows it :wink: )
C U B I S T - 1 1 1 5

'83 Triumph Acclaim - 3sp Auto (cat D)
Singer 3232 - Titanium bobbin, Autothread
'67 Gresham Flyer - Puncture, rear
Sherbet Lemons - 4oz, loose
Motorola - PG 2000, locked
roy mawbey
Put a fork in me, I'm done!
Posts: 1872
Joined: Thu Dec 25, 2008 2:28 pm
Location: sunny sussex

Post by roy mawbey »

Sensible reply from cubist. Unless you know every hump and bump you might just regret the decision. I'm old fashioned I admit it, but once on the road trying to get the sporty feel out of a 50 year old car you will never stop doing something else once you lower it. Your car looked just great at Goodwood when I saw it. For the time, Erwin did a good job in the first place.

I remember thinking Sunbeam Talbot 90's were low in the 50's when my uncle drove them but when I saw the 356 also during that decade I never thought a car could get much lower!

It still looks side on the best where it is! ( of course all in MHO !!!!!)

[img][img]http://i443.photobucket.com/albums/qq15 ... 6a0004.jpg[/img][/img]

Roy
RHD 356A coupe super 75 106954
Post Reply