One day I'll get round to starting this project !!!

Helen · Post by **Helen** » Sun May 31, 2009 7:40 pm

it dosn't actually look that bad as it is

Milly · Post by **Milly** » Sun May 31, 2009 7:42 pm

You wanna see the smoke poor out of it when she's running

Thinking about putting a VW lump in while I save up (or wait for the lottery win) to get her back on the road

roy mawbey · Post by **roy mawbey** » Mon Jun 01, 2009 5:32 pm

Interesting car and RHD. The front has no horn grills it looks early 356A?
but it has some B or C doors or windows?

Hope you get in on the road to enjoy! ( even with a VW engine)

Roy

Derek · Post by **Derek** » Mon Jun 01, 2009 7:03 pm

Type 1 motor, rattle can matt black paint, good to go

Derek

dcraigmyle · Post by **dcraigmyle** » Mon Jun 01, 2009 8:16 pm

I had one that looked like that and when i chemically dipped it i was left with an expensive colander!
What year is it? does it have original engine?

Milly · Post by **Milly** » Mon Jun 01, 2009 9:14 pm

Evening all,

It's a 1960, so a B with a fibre glass front end !?! after a

in a previous life !!!

So I apprecaite it's worth next to nothing to a porsche'ophile . . . BUT hey I wouldn't ever be in a position to have an orginal one financially so

It has the original engine, but like I say I aint set financially to have it rebuilt so thinking a VW motor is the way to go.

Has anyone done this on here ??

Few hurdles I believe to get it sorted. I.e. tinware, clutch and flywheel, throttle linkage ?!?!

Any pointers would be most welcome

Ignatzcatz · Post by **Ignatzcatz** » Mon Jun 01, 2009 9:24 pm

Hey Milly, if I lived in North Devon, I'd say screw the car lets go surfin.

Dakota · Post by **Dakota** » Mon Jun 01, 2009 9:51 pm

Hi Milly
the engines need not cost a bomb to fix and do you want some tail lamps and a number plate lamp for your car , Bill

Milly · Post by **Milly** » Mon Jun 01, 2009 9:55 pm

Ignatzcatz wrote:Hey Milly, if I lived in North Devon, I'd say screw the car lets go surfin.

Always surfin bud . . . that's why this is the first time it's been moved out of the garage for 2 years !!!

Milly · Post by **Milly** » Mon Jun 01, 2009 9:55 pm

Dakota wrote:Hi Milly
the engines need not cost a bomb to fix and do you want some tail lamps and a number plate lamp for your car , Bill

Hey bill . . . what tail lamps have you got ??

dcraigmyle · Post by **dcraigmyle** » Tue Jun 02, 2009 11:01 am

What engine does it have? I might be interested in buying the engine if you wanted some funds for a vw one.
Have youy any photos of engine
can email them to :
porsche356a@btinternet.com

Milly · Post by **Milly** » Tue Jun 02, 2009 3:33 pm

dcraigmyle wrote:What engine does it have? I might be interested in buying the engine if you wanted some funds for a vw one.
Have youy any photos of engine
can email them to :
porsche356a@btinternet.com

Hello buddy . . . Thanks for the offer but I'm not considering selling the engine at this time.

Dakota · Post by **Dakota** » Tue Jun 02, 2009 11:05 pm

Hi Milly
here are a couple of pictures of the tail lights ,they are not in bad nick and I have some lenses as well, Ithink I have a half decent replica number plate lamp and there are more bits and peices kicking around , don't get shot of anything until your certain you don't need it , as for flywheels they can be bought new , the last one I got was one hundred and thirty quid , I think, there are lots of bits out there you just have to get out and about and keep your eyes open , Bill

Timo · Post by **Timo** » Wed Jun 03, 2009 1:59 pm

Type 1 motor, rattle can matt black paint, good to go

Derek

Dude, I don't think you should be giving any advice on rattle cans at the mo

DDK - Die Deutschen Klassiker

One day I'll get round to starting this project !!!

One day I'll get round to starting this project !!!

One day

Re: One day