t-5 wire diagram problem

[Ren]

Hi all, I just tried to replace my indicator switch but found that the wire diagram I have is not correct.


I have a red wire and a white with black strip and a white with red strip left over.

The diagram lists these as white.

How do they connect?

I also have a red with white strip wire from the main loom left over.

I dont want to assume the old switch was connected correctly.

Can any one help. Car is a 1960 B t-5 RHD.

[Rustbucket]

as in the stalk on the steering column?

it should give a left flash, right flash and in/out (high/lowbeam) ?

I thinks..............
Not sure about the foot switch to do the high/lo beam though ?

Are the wires coming off the new switch, or needing to go to?
d

[Ren]

Yes the turn signal switch stalk thing.

What foot switch? My B t-5 dont have a foot switch.

The red, white with red an white with black are coming off the switch.

The red with white is part of the main loom.

[Mick]

Hi,
My car is RHD JANUARY 1960 T5 and is wired as follows

SWITCH LOOM
brown === brown
black/thick green === black/thick green
black/red === black/red
black/white === black/white
black/purple === black/purple
black/thin green === black/thin green
black/yellow === black/yellow

WHITE/RED === RED/WHITE
YELLOW === YELLOW

hope this helps.if i can help with aything else please ask