Cobra RS seats – anyone actually bought/seen them?
Moderators: hot66, Miggs, 58A - 71E, impmad2000, drummerboytom, Barry, Helen, Viv_Surby, Derek, KS, abm914, Mike Usiskin
- KS
- Nurse, I think I need some assistance
- Posts: 15778
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Cobra RS seats – anyone actually bought/seen them?
A lot of people talked about them when I made my original post, but not sure if anyone ever bought any or have seen them. I'm interested in using a pair in my (cough, cough) Beetle but would welcome some 'hands-on' feedback before I commit either way. Thanks!
-
jwhillracer
- Me and DDK sitting in a tree! KISSING
- Posts: 2909
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: Cobra RS seats – anyone actually bought/seen them?
Haven't cured the misfire yet then KS?KS wrote: I'm interested in using a pair in my (cough, cough) Beetle
JW
Life's a single timed run with no practice....
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
- KS
- Nurse, I think I need some assistance
- Posts: 15778
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: Cobra RS seats – anyone actually bought/seen them?
See you at the traffic lights at Holmbush, sonny...jwhillracer wrote:Haven't cured the misfire yet then KS?KS wrote: I'm interested in using a pair in my (cough, cough) Beetle![]()
JW
(PS - does your grandmother know you've borrowed her car?)
-
jwhillracer
- Me and DDK sitting in a tree! KISSING
- Posts: 2909
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: Cobra RS seats – anyone actually bought/seen them?
[/quote]See you at the traffic lights at Holmbush, sonny...
(PS - does your grandmother know you've borrowed her car?)[/quote]
I'll still be back in Lostwithiel first - the beetle will never make the bend at the top of Penpillick hill!
JW
(PS - does your grandmother know you've borrowed her car?)[/quote]
I'll still be back in Lostwithiel first - the beetle will never make the bend at the top of Penpillick hill!
JW
Life's a single timed run with no practice....
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
-
Timo
- Put a fork in me, I'm done!
- Posts: 1664
- Joined: Wed May 16, 2007 9:52 pm
- Location: Shropshire
Yep, I have a pair ready to go into my 912. They are well made and very comfortable plus they are pretty darn light too (8kg each!). The only issues I've had are:
a) when I went to collect my seats one of them had a slightly loose fitting section in the vinyl, I pointed this out to them and they fixed it immediately (whilst I waited - 5 mins)
b) the captive nuts in the base of one seat did not line up with the laser cut adaptors they supplied me. Again they were very helpful here and supplied me with some new adaptors which they drilled specially to fit my seat base.
I think if you want to spend a lot more money you could get a slightly better finished seat from somewhere like vintage seats but for me the cobra seats tick all the boxes and the price means I won't be afraid to sit in them.
I hope this helps, if you need any more specific info let me know.
a) when I went to collect my seats one of them had a slightly loose fitting section in the vinyl, I pointed this out to them and they fixed it immediately (whilst I waited - 5 mins)
b) the captive nuts in the base of one seat did not line up with the laser cut adaptors they supplied me. Again they were very helpful here and supplied me with some new adaptors which they drilled specially to fit my seat base.
I think if you want to spend a lot more money you could get a slightly better finished seat from somewhere like vintage seats but for me the cobra seats tick all the boxes and the price means I won't be afraid to sit in them.
I hope this helps, if you need any more specific info let me know.
-
bazz55
- DDK slapper chatter
- Posts: 327
- Joined: Thu Dec 25, 2003 1:54 pm
- Location: midlands, sunny telford
-
Timo
- Put a fork in me, I'm done!
- Posts: 1664
- Joined: Wed May 16, 2007 9:52 pm
- Location: Shropshire
- KS
- Nurse, I think I need some assistance
- Posts: 15778
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
-
veryporky
- DDK forever
- Posts: 719
- Joined: Wed May 11, 2005 5:40 pm
- Location: Cambridge - ish
- KS
- Nurse, I think I need some assistance
- Posts: 15778
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Well, I bit the bullet and ordered some from Merlin Motorsport. They arrived the next day and I have to say I am very impressed with the design and construction...
BUT
When I unpacked the two seats, they have been trimmed in two slightly different types of vinyl! One is a matt-grained finish, the other a more normal smoother, slightly shiny vinyl. Sh*t. E-mailed Merlin and await a reply...
Nice seats, though.
BUT
When I unpacked the two seats, they have been trimmed in two slightly different types of vinyl! One is a matt-grained finish, the other a more normal smoother, slightly shiny vinyl. Sh*t. E-mailed Merlin and await a reply...
Nice seats, though.
-
tim78
- DDK slapper chatter
- Posts: 315
- Joined: Fri Jul 13, 2007 12:00 pm
- Location: East Sussex
- Contact:



