look what saw the light of day yesterday.. I forgot I had it

912uk · Post by **912uk** » Mon May 12, 2008 11:04 am

as long as it's sunny I will try and get this finsihed to put it onthe car and get the floor stripped off..

BTW once I have finished with the rotissery I will be selling it..

40 scout · Post by **40 scout** » Mon May 12, 2008 6:41 pm

Not keeping it for the next resto then!

912uk · Post by **912uk** » Mon May 12, 2008 6:54 pm

Yeah but I built it like so over the top I could put a tank on it

so when I am finished some one else can use it..plus this resto's almost about to celibrate it's 10th year!!!

should make the job easy, these summer afternoons have got me back out there.. I just bashed the pass door into shape, as it was well bashed in.. just going easy not hitting it cold, but warming up the panels with the hot air gun till it's smoking and then bumping it back to shape.. the doors 110% improvement from when I started.. I almost thought hmm it's a write off but it's coming back slowly, will never be perfect but with time and some filler it will be..

leaving it for now.. but looking to weld the pass floor back into morrow..

where did all this 356 enthusiasm come from.... i think from seeing yours come togeather so quickly!!

Gary71 · Post by **Gary71** » Mon May 12, 2008 7:48 pm

Is the 5mph sign as fast as it can go when you are pushing it out the garage

Good to see work back in progress

912uk · Post by **912uk** » Mon May 12, 2008 7:58 pm

Gary71 wrote:Is the 5mph sign as fast as it can go when you are pushing it out the garage

Good to see work back in progress

i knew some one would say some thing about that.. no it's how fast I am alowed to work on it.. hence 9 years later it's in bits still

It was left over from a huge auction of parts from a London Auction it's just for decor but makes a great filler mixing plate!!!

on the reverse...

Gary71 · Post by **Gary71** » Mon May 12, 2008 8:03 pm

I'm planning to learn welding all over again next week... I've just ordered a new welder and gas bottle. My first practice will be a foot long butt weld on my rear quarter. What could possibly go wrong

912uk · Post by **912uk** » Mon May 12, 2008 8:21 pm

just take your time and keep all the metal clean and the earth clean to. Barry is your man for some tips I even had a to have a few tips from him my self and I am doing ok..

Very happy with the 150amp welder I have , I am just trying to buy a Tig welder for the panel work..I havemissed 9 on ebay at the mo..

Gary71 · Post by **Gary71** » Mon May 12, 2008 8:27 pm

I have talked to 'da man' indeed it is the man that is making 'dem repair panels for me to mess up by welding them in!

912uk · Post by **912uk** » Mon May 12, 2008 8:40 pm

I am sure you will be fine..

Jez 356 · Post by **Jez 356** » Thu May 15, 2008 8:57 am

Well done Mark

I hope you got lots done before the rain arrives this morning?

Hopefully I will be able to pop down soon in the 356 to take a look at the progress.

Keep up the good work, now that you have started you must not stop until finished!

Regards Jeremy

912uk · Post by **912uk** » Thu May 15, 2008 5:22 pm

you can see the car this time. Rather than it all stacked up.. I had a HUGE clear out of stuff from the car port so lots of room