MFI Cold start and microswitch

2.4TE · Post by **2.4TE** » Wed May 07, 2008 12:41 pm

I had my share of fun and games with these items over the last few weeks, but finally solved the problems. Thanks to all here who helped (esp. Tim and Andy), also Grady Clay on Pelican. A detailed account for those interested is here:

http://forums.pelicanparts.com/showthread.php?t=403260

impmad2000 · Post by **impmad2000** » Wed May 07, 2008 12:48 pm

Well done Dave. Good result, and I'm surre you've learned a bit too

Cheers
Tim

hot66 · Post by **hot66** » Wed May 07, 2008 1:03 pm

great thread there

One day I might get around to checking my speed switch

210bhp · Post by **210bhp** » Wed May 07, 2008 9:50 pm

Dr Dave

I am really really sorry I missed the thread on pelican after my first reply. It seems to have gone under my radar. Anyway I have read the whole thing now and saved it to my MFI file.

Looks like you got the same satisfaction that I did working through the switch related problem. I think it good to share these things. You have documented the process very nicely in the thread.

I too could not have done the process without the help of Andy and Tim so again a big thank you to them.

Keep sharing on this forum (good bad or ugly). That's why DDK is so good!!!

Regards
Mike

2.4TE · Post by **2.4TE** » Thu May 08, 2008 8:28 am

No worries Mike. Yes Tim, I learned a lot, not least that patience really is a virtue!