New member from Wales

steve taylor · Post by **steve taylor** » Tue Apr 22, 2008 10:42 am

Hi, was sent here by Mark from RS-911, I have an Intermeccanica Speedster based on a shortened Beetle floorpan. I have just bought a stroker 2017 motor with Superflow heads and 45mm Dellortos which I intend to fit. Where's the best place to buy parts please, it has 90.5 bores which may need replacing as it's been stood or can they be re bored? Thanks, Steve.

hot66 · Post by **hot66** » Tue Apr 22, 2008 10:56 am

hi & welcome

I'm assuming the motor is a VW based type1?

If so you'll find everything you need here :

http://www.vwspeedshop.com/store/home.php

and for engine work

http://www.aircooled-performance.co.uk/

new Pistons & Cylinders are cheap enough and easy to replace if your originals are damaged / out of spec

steve taylor · Post by **steve taylor** » Tue Apr 22, 2008 6:22 pm

Thanks James, motor is a VW.