Carbs on US Ebay
-
neverbuysaround
- DDK Seasoned Poster
- Posts: 25
- Joined: Mon Jun 25, 2007 8:22 pm
Carbs on US Ebay
Evening all
The carbs in my 1969 912 need a full refurb I am told. Been on the Super Highway tonight and came across the following auction on Ebay.com
180125610844
Would these go well in my 912 or should I steer clear?
Regards
Rick
The carbs in my 1969 912 need a full refurb I am told. Been on the Super Highway tonight and came across the following auction on Ebay.com
180125610844
Would these go well in my 912 or should I steer clear?
Regards
Rick
1969 Porsche 912
1981 BMW 635CSi
1974 Rover P6 3500 V8
2006 Audi A4 Avant
1981 BMW 635CSi
1974 Rover P6 3500 V8
2006 Audi A4 Avant
-
Timo
- Put a fork in me, I'm done!
- Posts: 1664
- Joined: Wed May 16, 2007 9:52 pm
- Location: Shropshire
Personally I'd get a set of new weber 40 idf's or dellorto 40 drla's from this country if you can get hold of them. I know they are still stocked at a few places but stock is starting to dry up. At least if you get some from this country its not such a thrash to sort out any potential problems when they arrive with bits missing (as mine did!) From what I've heard the empi hpmx kits are a copy of the spanish weber 40 idf but being assembled in china they have more quality issues than the spanish ones (which have more quality issues than the original italian ones!) Try www.vwspeedshop.co.uk or stateside tuning for weber/dellorto's. Good luck.
-
streetwagens
- DDK slapper chatter
- Posts: 311
- Joined: Tue Dec 20, 2005 4:35 pm
The previous owner of mine cleaned them, not they pop and squeak like a good'un!
Slapping a pair of DRLA 40's on that I had lying around on adaptors from stateside tuning. Bloody expensive for a pair of flat plates though! Might look into getting a bunch made up as they are simple enough, and I'm probably going to need another pair for the 356.. 
-
neverbuysaround
- DDK Seasoned Poster
- Posts: 25
- Joined: Mon Jun 25, 2007 8:22 pm
-
neverbuysaround
- DDK Seasoned Poster
- Posts: 25
- Joined: Mon Jun 25, 2007 8:22 pm
Sent off to the Carburettor Exchange
I sought further advice from Porsche Club GB and have now sent them to the Carburettor Exchange. They reckon I should have back in 6 weeks so I am hoping to make Hedingham Castle this year.
Once I get them back what is the best way to have them tuned? Can most garages of reputable background do it or is it a Porsche specialist job?
Rick
Once I get them back what is the best way to have them tuned? Can most garages of reputable background do it or is it a Porsche specialist job?
Rick
1969 Porsche 912
1981 BMW 635CSi
1974 Rover P6 3500 V8
2006 Audi A4 Avant
1981 BMW 635CSi
1974 Rover P6 3500 V8
2006 Audi A4 Avant

