Hi al, another tech question. Will these work 4 356 s90 heads from 1962?
Exhaust Stud, stainless steel, 8mm.
13 Stud, exhaust, stainless steel
[N01-444-312 S/S]
From VW Heritage.
DRen
s90 heads exhaust studs
-
Ren
- DDK forever
- Posts: 735
- Joined: Wed Sep 01, 2004 9:32 am
- Location: Southampton
s90 heads exhaust studs
Avoiding local so-called self proclaimed specialists.
-
Ren
- DDK forever
- Posts: 735
- Joined: Wed Sep 01, 2004 9:32 am
- Location: Southampton
s90 heads exhaust studs
Well see as I got no answers I went for it and found www.volksbolts.com who sell stainless steal kits with aerotight nuts and studs, abit like studs you get with a mainly custom sump kit. I have had a problem getting the old ones out so will let you know how this works out. Looks like it could be a good modification for ya heads.
Avoiding local so-called self proclaimed specialists.
-
912uk
- Nurse, I think I need some assistance
- Posts: 5954
- Joined: Wed Nov 12, 2003 11:02 pm
Hi David as per email really, let us know how you get on, I have all the tools to remove the old studs but I can't see any probs only some very obsure reason. To be honest as you are putting in new studs some lube on there would make then move in the future but I can't see any need to take them off. Esp using the copper nuts..
-
Ren
- DDK forever
- Posts: 735
- Joined: Wed Sep 01, 2004 9:32 am
- Location: Southampton
s90 exhaust studs
Hi Mark, well one was missing and one was snapped off so thought why not upgrade the part for stainless steal and yes they fit great. I just need to get the old ones out. Any help would be greatfuly received.
Avoiding local so-called self proclaimed specialists.