cam tower end plug

fourteener · Post by **fourteener** » Fri Jan 25, 2008 9:33 am

Has anyone got this part in there part boxes? P# 901 105 161 01

Mike911scrs · Post by **Mike911scrs** » Fri Jan 25, 2008 10:52 am

HI fourteener

try the dealer/OPC as the price is bellow

90110516101 LID 2 1.60 GBP

regards mike

fourteener · Post by **fourteener** » Fri Jan 25, 2008 12:52 pm

Thanks Mike, Any ideas how it secures? Is it a press fit with some sealant, is the end of the cam sealed in the cam tower from the bearing oil pressure. I've taken the sporto pump off and there is some oil behind it.

Mike911scrs · Post by **Mike911scrs** » Fri Jan 25, 2008 1:20 pm

HI fourteener
the plug is just a push fit in with a hammer, like a coreplug on a mini or a ford engine, I would put a drop of sealant round it and hammer in , clean the cam box first and remove the 2 drive pins from the end if the cam, as you will find the plug will not fit with them in .

regards mike

fourteener · Post by **fourteener** » Fri Jan 25, 2008 1:36 pm

Thanks Mike -most helpful