I have a pair of 2.0 litre MS exchangers in good condition. They are not perfect, jacket getting a bit thin at the end, but with a bit of high temp paint they should last for a very long time. I was thinking of painting them then wrapping them with exhaust bandage to improve their efficiency! Or if you are a dab hand with the welder you could melt a bit of weld onto the ends and fix them up 100% See photos for details.
Full size images here:
http://img4011.photobox.co.uk/477282613 ... 38a7f3.jpg
http://img4011.photobox.co.uk/094348984 ... 531298.jpg
http://img4011.photobox.co.uk/24489611c ... 081155.jpg
http://img4011.photobox.co.uk/24111938c ... 5ab7ce.jpg
http://img4011.photobox.co.uk/629157036 ... 25d20e.jpg
I only want what I paid for them which is 50 GBP plus P&P approx 15 GBP
Also I have a pair of 1.7 litre headers, good solid condition will last for years. These are the ones that have just come off the car, you can tell that by the fresh oil stains!!!:
http://img4011.photobox.co.uk/093103392 ... f6dd6c.jpg
Just want 20 GBP for these plus P&P approx 15 GBP. Postage may fall into the next category down on these, I haven't weighed them yet. If it does the P&P will be 13GBP.