Bonnet catch wanted

stuby · Post by **stuby** » Mon Sep 10, 2007 11:48 pm

I need a bonnet catch (the one that fits in the front panel)

Anything reasonable considered
Stu

stuby · Post by **stuby** » Tue Sep 11, 2007 10:25 pm

Bump to the top......

1972_911t · Post by **1972_911t** » Tue Sep 11, 2007 10:31 pm

Hi Stu

Prestige salvage in leeds had a 73 long hood in last year may be worth giving them a ring?

Steve

stuby · Post by **stuby** » Thu Sep 13, 2007 8:46 pm

Thanks for that - will dig their no. out tomorrow
Would have thought there would be loads of them about..... its the bit on the front panel I need, the bonnet bit is ok

Stu

early2.2S · Post by **early2.2S** » Sat Sep 15, 2007 1:15 pm

I, and many others i know, have always found with these that you have to replace both catches otherwise the bonnet keeps pinging open to the big latch.
Not a lot more expense to end that stressful annoyance when you think yu've just fixed it............!!
Regards
Stuart

revival-cars · Post by **revival-cars** » Sat Sep 15, 2007 4:06 pm

I have some spares, will PM you a pic.