List of parts needed - 2,2 S Coupé

[vricardo]

Hi all, this is my "new" 2,2 S 1970 Coupé. As you can see for yourselves, I'm going to need several body panels and trim to restore it to it's original condition. So, if you have any of the following parts, please let me know:

- 1 steel front hood (long);
- 1 steel left front wing (LWB 1969/1973);
- 1 steel right front wing (LWB 1969/1973);
- 1 steel front bumper;
- 1 aluminium engine hood;
- 1 aluminium central rear plate (don't know the exact name, but it's located between the rear bumpers);
- 1 complete set of front chrome bumpers, (inc. rubbers);
- 1 complete set of rear chrome bumpers, (inc. rubbers)
- 2 sets (left and right) of the "S" aluminium side trim;
- 2 sets (left and right) of the "S" aluminium wheel arches trim;
- 2 Recaro S front seats (left and right).

As always, any suggestion is always welcome.

Also, as I'll be repacing the listed parts, they're equivalents will be for sale. So, if you want any of those parts I'm selling, please drop me a line.
Hope to hear from you soon!

[Nick Moss]

1 steel front hood (long); Available new from Porsche or repro.
1 steel left front wing (LWB 1969/1973); Available new from Porsche
1 steel right front wing (LWB 1969/1973); Available new from Porsche
1 steel front bumper; Available new from Porsche
1 aluminium engine hood; Very rare, I have one being restored, it will be IRO €2000
1 aluminium central rear plate; Available repro from Karmann Konnection
1 complete set of front chrome bumpers, (inc. rubbers); Available repro from Roger Bray
1 complete set of rear chrome bumpers, (inc. rubbers) - Available repro from Roger Bray
2 sets (left and right) of the "S" aluminium side trim; Available new from Porsche or repro from Roger Bray
2 sets (left and right) of the "S" aluminium wheel arches trim;
2 Recaro S front seats (left and right). I have a pair of 70-72 seats with frames in Vinyl, €2500

If you want a package of the new panels I can get some discount for you.

[Graham]

Aluminium engine lid 2000 euro's blimy,ive got one hanging in my garage,just needs a weld to the top which i was going to do next week!

[Bertroex]

Assuming these fuchs wheels are genuine, I would be interested in a pm about the sizes (ie 7 or 8 x 16 or 8 and 9 x 16) and their price!

Best regards,

Bert

[vricardo]

Thanks guys!



Very helpfull as always Nick, thanks again!
The aluminium wheel arch trim (maybe it's not written properly) is... well, it a thin bright anodized aluminium profile that's riveted to the wheel arch lip... sorry I must be calling it the wrong name... It was an option, not standard.

I'll keep in touch, as soon as I start selling what I don't need.

[Nick Moss]

it a thin bright anodized aluminium profile that's riveted to the wheel arch lip

Your description was very clear, I know what you are after, there are almost impossible to find in usable condition

[vricardo]

Ah... ok Nick!
I've just checked the prices on the new parts by Porsche and I want to cut my wrists...

[/img]