out of carrera2 . 1993 . done 76k
offers
g50 5-speed box
Moderator: Bootsy
-
ian c
- DDK Fanatic
- Posts: 92
- Joined: Thu Apr 12, 2007 11:33 am
- Location: manchester , uk . navi mumbai , india
-
Alastair Woodward
- DDK Newbie
- Posts: 1
- Joined: Thu Oct 12, 2006 8:15 am
- Location: Luxembourg
G50 Gearbox
Ian, did you replace the 5 speed with a G50 6 speed? Is any rebuild work required?
-
charlieboy
- DDK Fanatic
- Posts: 72
- Joined: Tue Oct 10, 2006 12:08 am
- Location: Aberystwyth
-
ian c
- DDK Fanatic
- Posts: 92
- Joined: Thu Apr 12, 2007 11:33 am
- Location: manchester , uk . navi mumbai , india
Porsche 964 carrera 2 G50 Gearbox
six speed now in !!! 
old 5 speed on ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... &rd=1&rd=1
my mobile number is in ebay ad if you need to speak to me
old 5 speed on ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... &rd=1&rd=1
my mobile number is in ebay ad if you need to speak to me
-
mrg3.6
- DDK rules my life!
- Posts: 1175
- Joined: Wed Jan 17, 2007 1:08 pm
- Location: South Wales
Re: Porsche 964 carrera 2 G50 Gearbox
Ian, I'm considering swapping out my 915 for a 6 speed to match my 993 NVR engine - any chance of describing your conversion and some photos.ian c wrote:six speed now in !!!
Thx
Martin
911SC 3.6
-
ian c
- DDK Fanatic
- Posts: 92
- Joined: Thu Apr 12, 2007 11:33 am
- Location: manchester , uk . navi mumbai , india
hi
dont really know what would be involved going from a 915 , but the conversion from g50 5speed , to g50 6 speed is pretty straitforward .
if you use a 993 c2 box , it bolts straiyt in , if not you needd to buy a 993 c2 box nose-cone .
993 linkage is then used .
i think this is about it !!
i ended up letting 9m do the conversion as i am working abroad and need the car to be roadworthy the minute i landed back in uk for lemans .
i did initial research on rennlist forums .
i would recommend this , but 964 forum rather than 993 forum .
if i can help anymore , in any way , i will be glad to .
ian
dont really know what would be involved going from a 915 , but the conversion from g50 5speed , to g50 6 speed is pretty straitforward .
if you use a 993 c2 box , it bolts straiyt in , if not you needd to buy a 993 c2 box nose-cone .
993 linkage is then used .
i think this is about it !!
i ended up letting 9m do the conversion as i am working abroad and need the car to be roadworthy the minute i landed back in uk for lemans .
i did initial research on rennlist forums .
i would recommend this , but 964 forum rather than 993 forum .
if i can help anymore , in any way , i will be glad to .
ian