DDK - Die Deutschen Klassiker

Hello here we have my 1976 Porsche 914 1.7 cc with twin 44 IDF weber carbs , LHD, http://i55.photobucket.com/albums/g158/atomman1/914/35d013e9.jpg http://i55.photobucket.com/albums/g158/atomman1/914/74afaa7d.jpg http://i55.photobucket.com/albums/g158/atomman1/914/37c3da3e.jpg http://i55.photobucket....

I have one from my old '65 912

It's got a bit of a dent in it and would need some work, depends what you are after ?

I got a new one for mine when i had it painted but ended up about £1000 with fog light covers and trim.

Gary

It's part 1 the door flap and has snapped exactly where the arrow points to on your drawing,

The passenger side must have already been fixed as it is held together like you describe with a nut and bolt rather than a pin,

It that the cheap part to replace ?

The outer 3 bolts that hold the arm up onto the car by the sill, when these are lose you can pivot the arm around the inner bush/arm bolt ,thus getting toe in or out, the camber is done by putting shims in above this part,

Hope that makes sense ?

Hello Jon Had a week off last week and replaced all the rear bushes on mine with poly graphite ones I have had lying round all winter, http://i55.photobucket.com/albums/g158/atomman1/a206ee5b.jpg He's a photo of one side all in bits http://i55.photobucket.com/albums/g158/atomman1/01d561ac.jpg Old bu...

I think i have a spare one or two of these - i will have a look when i get chance. is it just the opening handle bit you need? Cheers Yes it's the handle bit I need, the lever has snapped off the other side of the pivot point from the handle you pull, I hope that makes sense! Is that the part you m...

Wanted 914 outer door handle

Doesn't matter which side or keys I just need one for parts as mine has snapped off the bit that opens the door.

Many thanks

Gary

Mine had the same problem as yours and it was just the inner bush, i just made one up and fitted it, its quite easy to get the arm off. Undo all the drive shaft bolts and them the rear brake calliper and unclip the flexi and handbrake cable. Then undo the 3 bolts on the outer plate of the arm and th...

Me to, I have always used SAE 30 and had no probs and its doesn't seem to leak.

thanks for the help chaps

Good morning all Got myself a nice wheel for the 914 but the splines are to small on the hub. Any one got any idea what size splines are on the steering column ? A quick look on Sunday they seem about 24mm but didn't have a vernier handy. Its a '75 if they change from year to year. cheers Gary

Hello


If your stuck I have some yellow injectors I took off my 1.7 to put carbs on not sure how good they are though,

Gary

Perhaps this is a roll on from the 912 value jumping up ? A few years ago in the VW sence when splits became cool. the price jumped up and everyone jumped on the band wagon importing splits and then bay's and even type 25's started going up in price, now look at T4's to. Good car are always gonna ge...

Old



New.

The tyres on the back of mine are quite close to the lip on the arch, must be the offset of the rivera's, So dont think i will get away with 195 65, was thinking of trying 185 60's or 65's, this wold also give the car a bit more ground clearance. just need to find something a bit sticky thats also g...