Accelerator rod bushes in tunnel.

[Loz]

Good afternoon,

I've looked on the Design 911 website that show two bushes used in securing the throttle rod inside the tunnel.
I found those two locations and fitted the bushes.

Can anyone confirm if there should be a third bush?
A couple of YouTube videos mention three bushes and there is a sprung bracket close to the pedal cluster inside the tunnel. Should this have a bush as well?

Many thanks in advance.

Loz

[stretch]

Loz, do you not have the spare parts manual to hand.? If not i know a bloke selling one. ! I couldn't have assembled my car without it.

[Loz]

I felt your post hit me straight between the eyes when I first saw it Dave.

[Lightweight_911]

.

I'm just in the process of doing this job on mine - there are 3 ... one by the gearchange coupler, one under the handbrake & the third under the gear lever.

Couldn't believe how expensive they are ... almost a tenner each for a little plastic part !!

[Loz]

.

I'm just in the process of doing this job on mine - there are 3 ... one by the gearchange coupler, one under the handbrake & the third under the gear lever.

Couldn't believe how expensive they are ... almost a tenner each for a little plastic part !!

Tenner each!! I knocked a few up on the lathe only because I couldn't wait for delivery, but I'm glad I didn't now!
The front one...did you find that the metal strap was the wrap around? Or does it go in the sprung clamp?
I put it in the sprung clamp but I think it's causing a slight bind. I'll try and post up a couple of photos.

[Loz]

This is the front one that fits inside a sprung clamp.
The others have the wrap around tabs as in the second photo.


Sent from my Pixel 8a using Tapatalk