Hi guys.
Does anyone know a place when I can get the rear trailing arms check for correct tolerance?
It’s for a 1970 911’S
Cheers.
John.
Ps.
UK based.
Rear trailing arms
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
Re: Rear trailing arms
The only one I’ve heard of it Tuthills… I’m sure many others have the jig for the trailing arms though
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
-
MBEngineering
- I luv DDK!
- Posts: 779
- Joined: Fri Mar 31, 2006 10:54 am
- Location: Kendal CUMBRIA
- Contact:
Re: Rear trailing arms
Hi 911st
are the arms stripped out of all parts, apart from the inner bushes, as I have tool P295B for checking the Left/Right, steel, Long wheel base, supension arms
where are you?
are the arms stripped out of all parts, apart from the inner bushes, as I have tool P295B for checking the Left/Right, steel, Long wheel base, supension arms
where are you?
Re: Rear trailing arms
Hi.
Currently they are still on the car, as I have a test day on Sunday.
I’m planning on doing a full suspension overall and re plating etc…
I am based in the midlands but I could come up for a day out or could ship them.
Cheers.
John.
Currently they are still on the car, as I have a test day on Sunday.
I’m planning on doing a full suspension overall and re plating etc…
I am based in the midlands but I could come up for a day out or could ship them.
Cheers.
John.