Wanted - Intermediate Shaft 67 911

[redrobin911]

HI - My 67S engine was not only badly damaged when i got it but aslo came as a box of bits. Currently rebuilding and noticed the intermediate shaft is for a later engine. While I do have a suitable shaft for an original 65 911 engine I'd rather not use is as will only have to find a shaft to replace it later - hence the ask now.

The early 911 (sand cast aluminium engine case) up to 67/68 had main shaft diametre of 30mm and are stamped with a 0, you'll also see the shaft part that extents through the engine case is different to later ones. Can also be easily identified as the gear is fixed to the shaft with 3 bolts and 3 dowels, later with 6 bolts.

If anyone has one I'm happy to pay market value for one that is good and useable. Pic below for id reference.

Many thanks....