A guide to polishing your fuch alloys

This is for paid up members only

Moderator: Miggs

Post Reply
Miggs
Site admin and the Boss
Posts: 1529
Joined: Fri Nov 07, 2003 10:32 pm
Location: Norwich

A guide to polishing your fuch alloys

Post by Miggs »

Image

The wheels were black with the original coating underneath

So i got some heavy duty paintstripper got all the black off then i was left with the anodised coating which was a ba*!" £d to get off.

So i used some mr muscle oven cleaner left that on for about a hour then i was left with just the alloy dont leave it on any longer as it will eat the alloy

Now heres the hard bit start with 240 wet and dry then 320 then 400 then 600 then 1000 then 1200 all wet of course with a little bit of washing up liquid in the water then polish to your hearts content and you are left with the result you see


Image[/img]
COMPUTER GAMES DONT AFFECT KIDS,I MEAN IF PACMAN AFFECTED MY GENERATION AS KIDS, WE WOULD HAVE ALL BE RUNNING AROUND IN THE DARK LISTENING TO REPETITIVE MUSIC MUNCHING PILLS
Top
Dirty den
DDK Seasoned Poster
Posts: 44
Joined: Fri Nov 28, 2003 4:48 pm

Post by Dirty den »

very impresive will have to have a go at that 8)
drive it like you stole it ;-)

Image
Top
fine69
Married to the DDK
Posts: 247
Joined: Sun Jan 25, 2004 11:27 am
Location: Belgium

Post by fine69 »

Just the way we like 'em. You've reminded me I need to do mine again, ouch!!
Top
james33
DDK Fanatic
Posts: 84
Joined: Wed Nov 12, 2003 9:13 pm
Location: Cork Ireland

Wheels

Post by james33 »

Once you have them looking like this is there any way of protecting them so I can drive and not polish?
'71T
'73 2.4S (sold)
'60 AH 3000 MK 1
Defender 110 '98
Top
fine69
Married to the DDK
Posts: 247
Joined: Sun Jan 25, 2004 11:27 am
Location: Belgium

Post by fine69 »

I've been recommended coating them with WD40 or using Zymol wheel coat. But I think the only way is keeping them clean and polishing. I'd be grateful for any other tips.
Top
pauladev
Moderator
Posts: 272
Joined: Thu Nov 13, 2003 9:30 am
Location: Algarve, Portugal

The other way

Post by pauladev »

ImageImage
Viper Green '75 914
Light Yellow '69 911'T' (sold)
Rubystone Red '90 944 S2 Cab (sold)
Metallic Blue '70 914-6 (sold)
Top
User avatar
Bootsy
Site admin and the Boss
Posts: 25716
Joined: Sat Nov 08, 2003 6:09 pm
Location: Norwich
Contact:
Contact Bootsy

Post by Bootsy »

I've heard about Cecil before and only good things - is he in the West Midlands?
1972 911T | 1994 993 Carrera | 1999 986 Boxster |

Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Top
69Olive
DDK above all
Posts: 165
Joined: Thu Nov 13, 2003 6:26 pm
Location: Henley-on-Thames

Post by 69Olive »

£20 a wheel??? What's the catch?

There's a Rainbow Polishing in Birmigham on 0121 565 0967 - is that them?
1969 911T - E Engine
Top
Miggs
Site admin and the Boss
Posts: 1529
Joined: Fri Nov 07, 2003 10:32 pm
Location: Norwich

Post by Miggs »

yeah i know what you mean i got jarred off with doing them by hand so sent mine off

Image
COMPUTER GAMES DONT AFFECT KIDS,I MEAN IF PACMAN AFFECTED MY GENERATION AS KIDS, WE WOULD HAVE ALL BE RUNNING AROUND IN THE DARK LISTENING TO REPETITIVE MUSIC MUNCHING PILLS
Top
pauladev
Moderator
Posts: 272
Joined: Thu Nov 13, 2003 9:30 am
Location: Algarve, Portugal

Post by pauladev »

Yes Cecil can be found on 0121 565 0967, and is in the Oldbury/Smethwick area of Birmingham. He is a great character - looks a bit like the Tin Man from Wizard of Oz when he emerges from his cave covered in alloy dust - but only a two man band, so you need to have time. Perhaps the entrepreneurial wizards of DDK can negotiate a Club Discount!!!
Viper Green '75 914
Light Yellow '69 911'T' (sold)
Rubystone Red '90 944 S2 Cab (sold)
Metallic Blue '70 914-6 (sold)
Top
nickphillips
DDK above all
Posts: 159
Joined: Sun Jan 25, 2004 8:36 pm
Location: Warrington

Polishing Door Surrounds etc

Post by nickphillips »

Hi
Sorry to deviate from your original post but has anybody manage to polish/re anodise the door/glass surrounds, windscreen surround etc. I believe they are anodised aluminium.

cheers
nick
Top
Nick Moss
Nurse, I think I need some assistance
Posts: 9424
Joined: Sat Nov 08, 2003 6:59 pm
Location: East Sussex
Contact:
Contact Nick Moss

Post by Nick Moss »

Autofarm have had later black frames polished and bright anodised for their backdate cars
Nick Moss - early911.co.uk - Fuchs refurbishment
07980 017994
nick@early911.co.uk
Top
912uk
Nurse, I think I need some assistance
Posts: 5954
Joined: Wed Nov 12, 2003 11:02 pm

Post by 912uk »

mike the wheels look good will have to see these soon

Got to get on with me other cars soon.
Top
Post Reply

Return to “Members only”