914 parts

Please add Porsche parts and anything you wish to sell here (no commercial sales)

Moderator: Bootsy

Post Reply
rhd racer
DDK 1st, 2nd and 3rd for me!
Posts: 2068
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

914 parts

Post by rhd racer »

Hi all

I am hoping not to need any of these bits anymore, but only time will tell!

OE transmission / engine mounts. Used for about 100 miles. £50 pr

Image

Urethane aftermarket mounts – compressed where have been used on transmission but still very good. Good upgrade to iron out sloppy shifting. SOLD

Selection of 914 gear shift bushes (x2 bulkhead bushes [1required per car, 1 OEM, 1 heavy duty]), and pr of shift rod to rear linkage bushes. SOLD

914/4 rotor arm. New, but some corrosion due to long term storage to dizzy contact which needs cleaning. £2.50

Image

914 Combi guage. Average condition £10

Image

914 Steel rear boot lid. Pretty good, minor corrosion to one corner only (see pics) £50

Image

Image

Image

Image

914 doors (pr). Very good early doors (no inner crash protection bars), c70-71 vintage. Very light, very good condition bar small hole in bottom of one, and extra holes drilled for aftermarket mirror in the other. I bought these to put ally skins on to make superlight, but no longer needed.£200pr

Image

Image

Image

http://i438.photobucket.com/albums/qq10 ... bemhtl.jpg

914 lightweight racing roof. Never fitted, needs mounting method sorting, never got around to fitting but extraordinarily lightweight. SOLD


914 ventilation & heating bundle. Air box (flaps operate freely), heater control unit with cables and plastic slider handles, various clips, vents boxes & vent ducts with cables (though note the tabs have broken off so only useful for spares or gluing together), two heater flapper boxes –one good, one lazy. Job lot SOLD


Collection from Notts for the big stuff, or might be able to deliver depending on where you are. Happy to post / courier items at cost.

Cheers for looking,
Wayne
Last edited by rhd racer on Tue Mar 10, 2015 10:22 pm, edited 2 times in total.
93 964 C2
99 Boxster 2.5 > 2.7 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
Steve C
DDK Seasoned Poster
Posts: 35
Joined: Wed Oct 25, 2006 12:28 am
Location: Norfolk

Re: 914 parts

Post by Steve C »

Hi, I would like the heater parts please. Will pm you with payment details.
Thanks
Steve
Steve

'75 914 1.8 RHD
rhd racer
DDK 1st, 2nd and 3rd for me!
Posts: 2068
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

Re: 914 parts

Post by rhd racer »

No problem Steve - sent you a PM

Cheers
93 964 C2
99 Boxster 2.5 > 2.7 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
Norm
DDK Newbie
Posts: 12
Joined: Fri Nov 07, 2014 4:54 pm

Re: 914 parts

Post by Norm »

I'll have the shift linkage bushes please.
bluemonk
DDK above all
Posts: 191
Joined: Thu Mar 15, 2007 9:36 am
Location: Reading, Berks

Re: 914 parts

Post by bluemonk »

First dibs on roof..

Pm'd you mate.

AL
rhd racer
DDK 1st, 2nd and 3rd for me!
Posts: 2068
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

Re: 914 parts

Post by rhd racer »

PMs answered, thanks chaps.

Al - got your location! let me look at my work diary and see what I can do, will be in touch

Cheers
wayne
93 964 C2
99 Boxster 2.5 > 2.7 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
bluemonk
DDK above all
Posts: 191
Joined: Thu Mar 15, 2007 9:36 am
Location: Reading, Berks

Re: 914 parts

Post by bluemonk »

Cool thanks Wayne
swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

Re: 914 parts

Post by swapped »

Urethane gearbox mounts paid for - thank you Wayne.
rhd racer
DDK 1st, 2nd and 3rd for me!
Posts: 2068
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

Re: 914 parts

Post by rhd racer »

My pleasure Carl.

Open to sensible offers on the body panels as I will not use. The photos really are warts and all, and the doors in particular are very good.

Cheers
Wayne
93 964 C2
99 Boxster 2.5 > 2.7 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

Re: 914 parts

Post by swapped »

Gearbox mounts safely received and fitted - many thanks.

And bump.
Post Reply