where to get a 23mm (ATE) m/c

gridgway · Post by **gridgway** » Mon Jun 14, 2010 9:41 pm

Here's one in the US...

$199 from rebel racing. Anyone know a supplier in blighty? The rebel racing one abovce comes with the right length pushrod.

Looking to put it on my 73 911. The one I saw on ebay looks quite different:

http://cgi.ebay.com/ebaymotors/Porsche- ... ccessories

Thanks
Graham[/url]

Highfield · Post by **Highfield** » Mon Jun 14, 2010 10:11 pm

Graham

IIRC you can use one from Mercedes !

Ian

JohnS · Post by **JohnS** » Tue Jun 15, 2010 4:32 pm

Does anyone have the Mercedes part number or car model number and year for the master cylinder? Maybe get one from Euro car parts or German Swedish with this info
Thanks
John

gridgway · Post by **gridgway** » Tue Jun 15, 2010 4:54 pm

That would def be useful.

Also the one pictured on ebay has a pressure sender in it. Is that for brake lights? Or not used on a 73 911?

Graham

Derek · Post by **Derek** » Tue Jun 15, 2010 8:05 pm

http://forums.pelicanparts.com/porsche- ... inder.html

Derek

gridgway · Post by **gridgway** » Thu Jun 17, 2010 1:53 pm

Thanks for the pelican links. It looks a fraught enough job to be left till the car is safely tucked up for the winter so I can get the old m/c off and take some time to get it right!

Graham

butzsi · Post by **butzsi** » Fri Jun 18, 2010 9:49 am

Graham,

Your USA sourced master cylinder is for a servo'd 911SC or 3.2 etc.

Chris

gridgway · Post by **gridgway** » Fri Jun 18, 2010 10:08 am

Thanks Chris, I was definitely right to abandon the project until I can get the old one out! Rebel Racing advertise it for non-boosted pre-77 applications which I took to mean non-servoed.

Have you done this mod before on a 73 car?

Graham