Meagsquirt EFI on a 2.2T - Real time data view with iPad

Gary71 · Post by **Gary71** » Tue Sep 05, 2006 3:41 pm

OK cheers. Sorted!

Gary71 · Post by **Gary71** » Wed Sep 13, 2006 4:26 pm

Finished the wiring!!!!!

Well most of it, I still need to do the detail of the connectors in the engine bay, but I'm leaving that until the harness is in place so I can get the lengths spot on.

I've made it in three sections for ease of assembly and built in a bit of redundancy in some extra cables for 4 wire Lamba sensor, PWM fast idle valve and some other bits I'm not going to use just yet.

Just need to fit it to the car now

Ian Donkin · Post by **Ian Donkin** » Wed Sep 13, 2006 7:43 pm

Fancy making another one

.

Gary71 · Post by **Gary71** » Wed Sep 13, 2006 7:46 pm

Gary71 · Post by **Gary71** » Wed Sep 13, 2006 7:46 pm

Gary71 · Post by **Gary71** » Wed Sep 13, 2006 7:48 pm

Double post

Clearly I meant it

You are welcome to the wiring diagram and stick drawing with all the measurements on though

Mick Cliff · Post by **Mick Cliff** » Wed Sep 13, 2006 7:50 pm

Come on Gary - don't mince your words

Ian needs something to act as a calalyst to get his project going

Gary71 · Post by **Gary71** » Wed Sep 13, 2006 7:52 pm

He's from Yorkshire, he'll understand

Spade is a spade and all that

Come on Ian, pull your finger out and get the fuel injection on!!!

(how's that?

)

Mick Cliff · Post by **Mick Cliff** » Wed Sep 13, 2006 7:52 pm

Ian Donkin · Post by **Ian Donkin** » Wed Sep 13, 2006 7:54 pm

But my cylinder heads are back from being ported (pictures when / if I ever get home again).

Ian Donkin · Post by **Ian Donkin** » Wed Sep 13, 2006 7:54 pm

And my manifolds.

Gary71 · Post by **Gary71** » Wed Sep 13, 2006 7:58 pm

So run it in on the carbs then put the EFI on...

Remember to put a lambda sensor boss in your new heat exchanger before you bolt them on. Then you can get rid of the old ones (hint

)

Mick Cliff · Post by **Mick Cliff** » Wed Sep 13, 2006 8:05 pm

Yeah, what Gary says. Come on Ian, get your finger out!

Gary71 · Post by **Gary71** » Wed Sep 13, 2006 8:23 pm

My Dad (an electrical engineer) just sent me this comment:

"The beauty of electrical engineering is if you make a mistake it stops working for ever and you have no idea why. It may catch fire just to give you a clue where it failed, but still will not work...."

Nice.

Barry · Post by **Barry** » Wed Sep 13, 2006 10:49 pm