Hi,
Further to my jacking/bumper removal enquiry, another newbie Q.
I need to kill the power to the horns which is on a permanent live feed, I assume there’s a relay somewhere with a fuse as I can’t see the horn mentioned on the fuse panel. I’ve tried the obvious feeds for the normally live lights, clock etc.
Any tips for locating/killing the power to them?
Alternatively I can just tape up the live horn connectors which are female but prefer to do it properly and also prefer not to disconnect the batts as it’ll bugger up the alarm etc.
Many thanks,
Kevin
1972 911T Horn Power/Fusing
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
kasbridge
- DDK Seasoned Poster
- Posts: 46
- Joined: Wed Feb 08, 2017 9:16 am
-
SeanP
- I luv DDK!
- Posts: 864
- Joined: Thu Sep 06, 2012 11:59 pm
- Location: North West Essex
Re: 1972 911T Horn Power/Fusing
Horn relay is next to the fuse boxes in the front
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
-
kasbridge
- DDK Seasoned Poster
- Posts: 46
- Joined: Wed Feb 08, 2017 9:16 am
Re: 1972 911T Horn Power/Fusing
Hi Sean - thanks! I’ll pull it out later and check - I was diverted by the internet in the wrong direction!

