Unstamped 356/912/industrial timing cover/3rd case piece please!
Moderator: Miggs
-
- Married to the DDK
- Posts: 284
- Joined: Tue Dec 20, 2005 4:35 pm
Unstamped 356/912/industrial timing cover/3rd case piece please!
Does anyone have an unstamped crankcase 3rd piece for sale please? Thanks, Dai.
@Barnwest
Searching for:
‘65 4 screw horn grilles
‘65 door handles
6 miles of mig wire
Searching for:
‘65 4 screw horn grilles
‘65 door handles
6 miles of mig wire
-
- Put a fork in me, I'm done!
- Posts: 1663
- Joined: Fri Mar 01, 2013 11:45 am
- Location: Kernow - good old Cornwall
Re: Unstamped 356/912/industrial timing cover/3rd case piece please!
Have you tried PRS?
-
- DDK slapper chatter
- Posts: 401
- Joined: Tue Oct 01, 2013 5:04 pm
Re: Unstamped 356/912/industrial timing cover/3rd case piece please!
I thought that the 356 and 912 3rd pieces were different due to the different engine mounting arrangements in the different cars? Not sure as I haven't seen a 912 up close. Neil Bardsley will know.
'65 356 SC
'91 Ducati 750/900ss mongrel
1963 Velocette Viper (mostly) with '39 KSS OHC engine
'05 997 C2
1954 FB Mondial 200 Extra Lusso
'91 Ducati 750/900ss mongrel
1963 Velocette Viper (mostly) with '39 KSS OHC engine
'05 997 C2
1954 FB Mondial 200 Extra Lusso
-
- Married to the DDK
- Posts: 284
- Joined: Tue Dec 20, 2005 4:35 pm
Re: Unstamped 356/912/industrial timing cover/3rd case piece please!
Aah- it’s a 912 one I need, and I’ve only got 912 ones here at the moment to compare! In that case yes, 912 with the studs for the bar is what I need - thank you!Kneeslider wrote: ↑Thu Dec 21, 2023 11:32 am I thought that the 356 and 912 3rd pieces were different due to the different engine mounting arrangements in the different cars? Not sure as I haven't seen a 912 up close. Neil Bardsley will know.
@Barnwest
Searching for:
‘65 4 screw horn grilles
‘65 door handles
6 miles of mig wire
Searching for:
‘65 4 screw horn grilles
‘65 door handles
6 miles of mig wire
-
- DDK rules my life!
- Posts: 1229
- Joined: Wed Apr 06, 2005 12:37 am
- Location: Billericay, Essex
- Contact:
Re: Unstamped 356/912/industrial timing cover/3rd case piece please!
I am sure that we have one
You can get me on mike356@btinternet.com
You can get me on mike356@btinternet.com
Mike at P.R.S.
www.prs356.com
www.prs356.com
-
- Married to the DDK
- Posts: 284
- Joined: Tue Dec 20, 2005 4:35 pm
Re: Unstamped 356/912/industrial timing cover/3rd case piece please!
Thank you Mike, I’ve emailed youMike Smith wrote: ↑Fri Dec 29, 2023 10:42 pm I am sure that we have one
You can get me on mike356@btinternet.com
@Barnwest
Searching for:
‘65 4 screw horn grilles
‘65 door handles
6 miles of mig wire
Searching for:
‘65 4 screw horn grilles
‘65 door handles
6 miles of mig wire
-
- Nurse, I think I need some assistance
- Posts: 7800
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Unstamped 356/912/industrial timing cover/3rd case piece please!
If PRS can't help you I think that Greatworth still have mine from the engine that was pulled from my 912
Sent from my 22011119UY using Tapatalk
Sent from my 22011119UY using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- DDK rules my life!
- Posts: 1229
- Joined: Wed Apr 06, 2005 12:37 am
- Location: Billericay, Essex
- Contact:
Re: Unstamped 356/912/industrial timing cover/3rd case piece please!
Sorry Streetwagen,
I was surprised to find that we do not have an un-stamped one
New from Porsche will be un-stamped of maybe Neil ?
I was surprised to find that we do not have an un-stamped one
New from Porsche will be un-stamped of maybe Neil ?
Mike at P.R.S.
www.prs356.com
www.prs356.com