Burnt Pig - 356 Pre a Build Thread

Robneal · Post by **Robneal** » Wed Sep 06, 2023 11:57 am

Filler primer and then sanding...

Top coat done and reassembled...

Sent from my SM-G991B using Tapatalk

Robneal · Post by **Robneal** » Wed Sep 06, 2023 12:01 pm

Some ideas for my interior to give you a flavour of what the interior will look like...

Sent from my SM-G991B using Tapatalk

greg356a · Post by **greg356a** » Wed Sep 06, 2023 4:02 pm

Touch of diamond is always a good thing

mdmax72 · Post by **mdmax72** » Tue Sep 12, 2023 9:47 am

A lot of women would agree with you Greg

mdmax72 · Post by **mdmax72** » Tue Sep 12, 2023 9:48 am

When is Steve actually starting on it Rob?

Robneal · Post by **Robneal** » Tue Sep 12, 2023 10:24 am

Next Monday when he is back from holiday....

Sent from my SM-G991B using Tapatalk

sladey · Post by **sladey** » Fri Sep 15, 2023 4:48 pm

Looks great

Robneal · Post by **Robneal** » Thu Jan 04, 2024 1:00 pm

A few quick pics of the Interior work in progress, hope to have it finnished in the next few months...

Sent from my SM-G991B using Tapatalk

Post by **Bootsy** » Thu Jan 04, 2024 2:11 pm

Robneal · Post by **Robneal** » Tue Mar 12, 2024 10:37 am

My car's home and now have a lot of small jobs to do to get it ready for road test then the IVA.
Lots of little Wiring gremlins that Stuart from SR Autoelectrics is sorting out....
Added numberplates
Fitted Windscreen wipers and washers properly as they had not been reinstalled when the car was painted
Made 17 digit VIN plate that needs welding onto the chassis rail in the engine compartment
gave the interior a good vacuum out
Dash is out at the moment to aid in fixing the wiring gremlins and now the dash has been covered it has pushed the steering column tube down so need to make a small spacer to mount under the top of the column mount so the column is again centered in the steering tube...
The biggest problem to solve is the doors don't now close properly so need to dismantle them to understand why. They did close properly when the body was painted so this must be something to do with the trim/seals and maybe a problem with the locks being not adjusted correctly.
It's just time to solve most of the remaining problems.

Robneal · Post by **Robneal** » Tue Mar 12, 2024 10:46 am

Easier to attach photos from Mt phone...

Sent from my SM-G991B using Tapatalk

greg356a · Post by **greg356a** » Tue Mar 12, 2024 4:46 pm

Looks bad to the bone

Cant wait to see it in the flesh. Congrats

Post by **Bootsy** » Tue Mar 12, 2024 5:21 pm

Does look superb, hope the Iva all goes well

Robneal · Post by **Robneal** » Thu May 16, 2024 9:11 am

IVA booked for 3rd June and just doing last few jobs to prepare... Can't wait to be on the road at long last...

Sent from my SM-G991B using Tapatalk

Post by **Bootsy** » Thu May 16, 2024 9:21 am

Excellent!

DDK - Die Deutschen Klassiker

Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread

Re: Burnt Pig - 356 Pre a Build Thread