911 R style EFI high butterfly… it’s running video …..
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
911 R style EFI high butterfly… it’s running video …..
I thought I’d post the development of my injection system here
Having recast the 98mm high manifolds, I thought I’d add a injector boss, so the injector sprays fuel straight onto the valve, like the mfi and cis systems.
Throttle bodies will be 80mm high, with the butterfly 55mm above the manifold.
Air filters and trumpets will be the same as used on carbs
Having recast the 98mm high manifolds, I thought I’d add a injector boss, so the injector sprays fuel straight onto the valve, like the mfi and cis systems.
Throttle bodies will be 80mm high, with the butterfly 55mm above the manifold.
Air filters and trumpets will be the same as used on carbs
- Attachments
-
- 161461F8-3EA1-4CB9-A9CA-5A0A68AE6A16.jpeg (38.22 KiB) Viewed 792 times
-
- 9C16D83C-5A1D-4C9A-B22E-A270F932883E.jpeg (32.3 KiB) Viewed 792 times
Last edited by Madjad on Sat Jun 19, 2021 6:57 pm, edited 1 time in total.
Westbound Restorations since January 19
Re: 911 R style EFI high butterfly
Looks very interesting. Are you developing the whole thing? - whatever that means! Fuel rail, linkages, electrics and ECU?
Re: 911 R style EFI high butterfly
It will be a full kit, ready to bolt on. The fuel system is not being done with fuel rails, they are too modern in appearance. I want it to look retro.
Westbound Restorations since January 19
Re: 911 R style EFI high butterfly
Further development today, engine in and got the linkage working. Trial fitted the fuel distribution block, with built in pressure regulator
Can anyone lend me a rain hat, either fibreglass or steel, so I can get some amber fibreglass ones made?
Pictured with tall manifolds, and the prototype throttle bodies, with the injectors built in.
Can anyone lend me a rain hat, either fibreglass or steel, so I can get some amber fibreglass ones made?
Pictured with tall manifolds, and the prototype throttle bodies, with the injectors built in.
Westbound Restorations since January 19
Re: 911 R style EFI high butterfly
Looks really good!
Re: 911 R style EFI high butterfly
Nearly there, calibrated up ok, and I just need to add the vacuum take offs
- Attachments
-
- 687E51C1-E5C4-45EE-B7C5-C2B82B6D8851.jpeg (31.85 KiB) Viewed 567 times
-
- 1694FAE2-E527-42A3-B9E2-B9982378DE2E.png (67.46 KiB) Viewed 567 times
-
- 7DFCFDBF-8546-41A8-A36E-7CB54C3D1E65.jpeg (28.42 KiB) Viewed 567 times
Westbound Restorations since January 19