The eagle eye amongst you may have noticed afew anchor points added. I decided to update the seat belts and fit inertia reel systems. The original mounts and belts are fixed, the fronts are 3-point, but the shoulder belt has always been in an annoying position and the lap belt is more rib-cage containment
After some research and measuring I went ahead, drilled and reinforced new mounting points for the inertia reel belts.
Fixing plates...
Sill plates for lap belt...
Tunnel bracket and backing plate...
B-pillar reinforcement and nut plate...
Reel mount on inner arch, reinforced plate welded on both sides...
Rear fixed lapbelt mounts also added...
Everything painted, "fitted and tested"
