Will 914 Calipers fit a 911T.....are they the same part?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
Will 914 Calipers fit a 911T.....are they the same part?
Are front 914 Calipers the same as those fitted to a 911t? The mounting bolt spacing is the same (76mm) just not sure on the other bits?
1973 Porsche 911T
2011 Porsche 997.2 Carrera 4S
2012 Boxster 981 - (Wifes Summer Drive)
2019 Renault Megane RS 300 Trophy
2021 Cupra Leon
2021 Alpine A110 GT
2011 Porsche 997.2 Carrera 4S
2012 Boxster 981 - (Wifes Summer Drive)
2019 Renault Megane RS 300 Trophy
2021 Cupra Leon
2021 Alpine A110 GT
Re: Will 914 Calipers fit a 911T.....are they the same part?
They are essentially the same castings, but the pistons for 914/4 are 42mm against 48mm for the 914/6, 911 & 912.
With a T you may notice little difference unless you drive it hard, and the front/rear balance will also be off.
With a T you may notice little difference unless you drive it hard, and the front/rear balance will also be off.
Porsche historian & researcher, contact me for Kardex through 1969 model year.
Addicted since 1975
Addicted since 1975