I have been trying to find out what the part 90150108640, "cross tube", is. See part 2 in attached part diagram. When googled, some sources suggest it to be a "rear axle cross tube".
It appears to be a Targa only part and from the looks of it, it is bolted in. I can not find it or it's mounting points on my Targa, neither under the dash where the diagram suggests it to be nor around the rear axle.
It was bolted under the dashboard. Just above the knee scroll. There were box sections welded to the A-post. I always thought it looked very amateur in implementation.
Tim Bennett
RHD Targa 2.2T EFI, Triumph ITB's, EDIS and Megasquirt.
"Old enough to know what's right and young enough not to choose it"
#1153
I had to remove/reinstall mine to get the radio in. I think it's to stiffen the front end. Just a metal bar
Sent from my HTC One M9 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
I’m making a great effort to re-install mine during my resto as per factory spec right down to how the perlon carpet was folded areound the ends. Nutter.
Regards
Mike
_____________________________
73 RS (Sold)
67 S
Mint T (Sold)
996 Turbo (Sold)
73 2.4E (home after 25 years) and Sold again
73T targa (signal yellow project)
1953 Vauxhall Velox
914/6
1963 356B https://www.mybespokeroom.com/
_____________________________
73 RS (Sold)
67 S
Mint T (Sold)
996 Turbo (Sold)
73 2.4E (home after 25 years) and Sold again
73T targa (signal yellow project)
1953 Vauxhall Velox
914/6
1963 356B https://www.mybespokeroom.com/
Thanks all.
Mike, the pictures are very clear- thanks!
Definitely none in my car. I am actually not sure the welded on tabs are present on my A posts- I will check on the weekend.
Tim, if I find the mounting tabs I would in deed be interested in your bar!
